Abstract:The adsorption process is regarded as a promising technology for removing organics and heavy metals. In this study, we used orange peels as biomass feedstock and used nickel-manganese ferrite (Ni 1-x Mn x Fe 2 O 4 ) as the precursor solution to prepare magnetic mesoporous biochar (MBC). Using a Box-Behnken design response, we investigated the adsorption of 2,4-difluoroaniline (2,4-DFA), as well as the influence of four preparation parameters (activation temperature, the molar mass of Mn in Ni 1-x Mn x Fe 2 O 4 , activation time, and impregnation ratio). Based on the adsorption rate of 2,4-DFA, we obtained the following optimal preparation parameters of MBC: a temperature of 180 °C, a molar mass of Ni 0.75 Mn 0.25 Fe 2 O 4 , an activation time of 8 h, and an impregnation ratio of 3. Then, we investigated the adsorption capacity of MBC and the mutual effect of 2,4-DFA and copper (II) [Cu(II)] through single and binary systems. The adsorption processes of 2,4-DFA and Cu(II) could be satisfactorily fitted to a pseudo-second-order kinetic model. The adsorption amount of 2,4-DFA was comparable in both single and binary systems. However, the adsorption of Cu(II) in the binary system was inhibited, with the adsorption capacity decreasing by 19.55%. The adsorption isotherms of 2,4-DFA and Cu(II) to MBC fitted the Freundlich model. The maximum adsorption capacity of 2,4-DFA and Cu(II) could reach 66.30 mg/g and 10.44 mg/g at 313 K, respectively. MBC exhibited good regeneration performance through the combination of 90% ethanol and 1 M NaOH solution. The adsorption mechanism mainly included electrostatic interactions, hydrogen bonds, ion exchange, and π-π interactions.

Adsorption of Cu(II) on β-cyclodextrin modified multiwall carbon nanotube/iron oxides in the absence/presence of fulvic acid

The adsorption property investigation of tetraethylenepentamine functionalized nano-Fe3O4 polymer adsorbents on Cu(II) from wastewater

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

RAPID ELECTROPHORETIC SEPARATION OF LACTATE DEHYDROGENASE ISOENZYMES ON CELLULOSE ACETATE.

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Adsorption Properties of Cu2+, Cd2+ and Ni2+ by Modified Magnetic Chitosan Microspheres

Multi-principles analysis of Cu(II) adsorption in water on magnetic microspheres and modified Chitosan

Removal of Cu(II) Ions from Contaminated Water Using Chemically Modified MCM-41

Effect of Natural Organic Matter (NOM) on Cu(II) Adsorption by Multi-Walled Carbon Nanotubes: Relationship with NOM Properties

Preparation of modified multiwalled carbon nanotubes (l-Arg-CS/MWCNTs-COOH/Fe3O4) as sorbent for dispersive solid phase extraction of Cu(II), Pb(II) and Cd(II) in wastewater samples

Magnetically Recyclable Loofah Biochar by KMnO 4 Modification for Adsorption of Cu(II) from Aqueous Solutions

Diverse Surface Chemistry of Cobalt Ferrite Nanoparticles to Optimize Copper(II) Removal from Aqueous Media

The difference in the adsorption mechanisms of magnetic ferrites modified carbon nanotubes

Adsorption and Co-adsorption of 2,4-Difluoroaniline and Copper (II) Using Nickel-Manganese Ferrite Magnetic Biochar Derived from Orange Peel

A Novel Adsorbent of Core-Shell Construction of Chitosan-Cellulose Magnetic Carbon Foam: Synthesis, Characterization and Application to Remove Copper in Wastewater

Surface-modified Nanoscale Carbon Black Used As Sorbents for Cu(II) and Cd(II).

Reciprocal effect of variables on the removal of Cu(II) by Fe/Mn-diatomite material

Mechanism of Cd(II) and Cu(II) Adsorption onto Few-Layered Magnetic Graphene Oxide as an Efficient Adsorbent

Assessment of Cu (II)-Bearing Montmorillonite on Cd Adsorption

Removal of Cu(II) from Aqueous Solution Using Fe3O4–alginate Modified Biochar Microspheres