Abstract:Biochar derived from municipal sludge can be applied to adsorption. But it usually requires activation and pickling due to the generation of impurities such as metal oxide particles, which is uneconomical. Here, a facile strategy, acidification-one-step calcination, was developed and sludge-based Fe–C materials with good Cr(VI) removal effect were obtained by regulating the amount of hydrochloric acid. The results show that the adsorption capacity of Fe/C-5 (the best sample) for Cr(VI) was 150.84 mg g−1. According to the Langmuir isotherm and pseudo-second-order kinetic model, the removal of Cr(VI) by Fe/C-5 is spontaneous and endothermic chemisorption process. In addition, Fe/C-5 has good ability to remove Cr(VI) under the interference of coexisting ions, and has good cycle stability. The removal of Cr(VI) by Fe/C-5 is considered to be synergistic process of adsorption and reduction. The Fe atoms were highly dispersed in Fe/C-5 and tightly bonded with C atoms, which not only strengthened the Cr(VI) adsorption by electrostatic attraction, but also activated the C atoms in the biochar material, so that the C atoms can reduce Cr(VI) to Cr(III) under acidic conditions. This may be due to the fact that acid pretreatment converted the iron in municipal sludge in the form of Fe–O/OH to free Fe3+ and entered the C lattice during the calcination process. In this work, Fe–C materials with excellent Cr(VI) adsorption capacity were prepared by one-step calcination method, which has important reference significance for the resource utilization of municipal sludge.

Study on Preparation of Activated Carbons Derived from Sewage Sludge with FeCl_3-Application to Cu~(2+) Adsorption

Adsorption of Copper (II) Onto Activated Carbons from Sewage Sludge by Microwave-Induced Phosphoric Acid and Zinc Chloride Activation

Application of activated carbon made from sewage sludge for adsorbing Cu~(2+)

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Adsorption of copper(II) onto sewage sludge-derived materials via microwave irradiation

Removal of Cu2+ from Aqueous Solution Using Sewage Sludgebased Activated Carbons with Pyrolusite Modification

The Preparation of Sludge-Based Activated Carbon and Its Physical and Chemical Characteristics

Study on Sewage Sludge-based Activated Carbons with Natural Mineral Modification for Enhanced Removal of Heavy Metal Ions from Aqueous Solution

Preparation, Characterization, and Application of Sludge with Additive Scrap Iron-Based Activated Carbons

Preparation and properties of sludge-based activated carbon based on ZnCl2 activation method

PREPARATION AND FRACTAL RESEARCH OF ACTIVATED CARBON FROM SLUDGE WITH ZnCIJCuCl2 AS ACTIVATING AGENT

Preparation of thiol-functionalized activated carbon from sewage sludge with coal blending for heavy metal removal from contaminated water.

Dried Biomass of Activated Sludge for Cu2+ Adsorption: Behaviors and Mechanisms

Supporting of Potassium Copper Hexacyanoferrate on Porous Activated Carbon Substrate for Cesium Separation

Zero-valent Iron Doped Carbons Readily Developed from Sewage Sludge for Lead Removal from Aqueous Solution

Effect of Pyrolusite Loading on Sewage Sludge‐based Activated Carbon in Cu(II), Pb(II), and Cd(II) Adsorption

The Adsorption Studies of Sludge Activated Carbon Modified by NH_4Cl on Heavy Metals of Lead and Cadmium

Preparation of Calcium Cross-linked Nano-Fe3O4 Modified Zeolite Microspheres for Cu2+ Adsorption from Wastewater

Fe/C materials prepared by one-step calcination of acidified municipal sludge and their excellent adsorption of Cr(VI)

Activated Carbon Preparation from Pyrolysis Char of Sewage Sludge and Its Adsorption Performance for Organic Compounds in Sewage

Adsorption Characteristics of Cu2+ from Pharmaceutical Wastewater Onto Activated Carbon