Abstract:Developing a environmental and cost-effective adsorbents for removal of Cu(II) from industrial wastewater is a quite serious problem. This study prepared a novel adsorbent of chitosan-cellulose enwrapped magnetic carbon foam (CCMF) to remove Cu(II) from industrial sewage. Magnetic core-shell construction facilitated the solid-liquid separation after adsorption. Groups of adsorption experiments for the adsorbability of CCMF were systematically studied at various conditions, such as pH (3.0-6.0), adsorbent dosage (1.0-4.0 g/L), initial concentration of Cu(II) (25-600 mg/L), temperature (20-30 degrees C) and adsorption time (10-1800 min). Fourier-transform infrared (FTIR) spectroscopy indicated that the amino and hydroxyl groups of chitosan were involved in the adsorption reaction and that N and O atoms were the adsorption sites. X-ray photoelectron spectroscopy (XPS) further confirmed that the N atom was the main adsorption site. The adsorption isotherm of Cu(II) on the CCMF was well correlated with the Langmuir isotherm model, the adsorption processes were a monolayer reaction and controlled by homogeneous adsorption sites on the surface, and the maximum adsorption capacity was 115.65 mg/g at pH 6.0 and 30 degrees C. The adsorption process of Cu(II) on the CCMF followed the pseudo-first-order kinetic equation within the initial 120 min. Meanwhile, the entire process fitted well with the pseudo-second-order kinetic model. Results have demonstrated that CCMF is a potential environmental adsorbent for the removal of Cu(II) in industry wastewater.

Application of activated carbon made from sewage sludge for adsorbing Cu~(2+)

Adsorption of Copper (II) Onto Activated Carbons from Sewage Sludge by Microwave-Induced Phosphoric Acid and Zinc Chloride Activation

Study on Preparation of Activated Carbons Derived from Sewage Sludge with FeCl_3-Application to Cu~(2+) Adsorption

Adsorption of copper(II) onto sewage sludge-derived materials via microwave irradiation

Dried Biomass of Activated Sludge for Cu2+ Adsorption: Behaviors and Mechanisms

Removal of Cu2+ from Aqueous Solution Using Sewage Sludgebased Activated Carbons with Pyrolusite Modification

Adsorption Characteristics of Cu2+ from Pharmaceutical Wastewater Onto Activated Carbon

Na4P2O7-Modified Biochar Derived from Sewage Sludge: Effective Cu(II)-Adsorption Removal from Aqueous Solution

Treatment of Cu(Ⅱ)-wastewater by magnetic activated carbon

Adsorption of Cu~(2+) in Wastewater on Bamboo Charcoal

The Preparation of Sludge-Based Activated Carbon and Its Physical and Chemical Characteristics

Preparation of activated carbon from activated sludge and its application in treating dye wastewater

Study on Sewage Sludge-based Activated Carbons with Natural Mineral Modification for Enhanced Removal of Heavy Metal Ions from Aqueous Solution

Biosorption behaviors of Cu~(2+),Zn~(2+),Cd~(2+)and mixture by waste activated sludge

Adsorbing Study on Removal of Cu(Ⅱ)from Wastewater by Sewage Sludge Ash

Preparation of thiol-functionalized activated carbon from sewage sludge with coal blending for heavy metal removal from contaminated water.

Dye adsorption properties of carbonized sludge and its application for treating dyeing wastewater

Preparation and properties of sludge-based activated carbon based on ZnCl2 activation method

Preparation of a biochar-lignosulfonate composite material and its adsorption performance for Cu2

Adsorptive Removal of Cu2+from Aqueous Solution Using Aerobic Granular Sludge

A Novel Adsorbent of Core-Shell Construction of Chitosan-Cellulose Magnetic Carbon Foam: Synthesis, Characterization and Application to Remove Copper in Wastewater