Preparation and properties of sludge-based activated carbon based on ZnCl2 activation method

Xin Li,Weiguang Li,Guangzhi Wang,Bin Chang,Gang Li,XuJin Gong,Chengyuan Su

2013-01-01

Abstract:For efficient resource utilization of sewage sludge, the sludge-based activated carbon was prepared by ZnCl2 activation method. Based on iodine and methylene blue adsorptivity, the preparation conditions were optimized. The properties of the sludge-based activated carbon were thoroughly studied by test analysis tools such as specific surface area analyzer and element analyzer, X-ray photoelectron spectroscope. And the sludge-based activated carbon was applied in the treatment of urban sewage. The results show that during the preparation process, the main influential factor is pyrolysis temperature, and then is pyrolysis time, the effects of activator concentration and impregnation ratio being relatively less. The optimum preparation conditions are 600°C, 50 min, 40%, 1:2.5 for the pyrolysis temperature, pyrolysis time, activator mass fraction and impregnation ratio, respectively. The sludge-based activated carbon is mainly mesoporous and has relatively small specific surface area. The contents of Al, Fe and Si in the sludge-based activated carbon are higher than those in commercial activated carbon. Large amount of oxygen-containing and nitrogen-containing functional groups exist on the surface of the sludge-based activated carbon and the surface is acidic. The concentrations of heavy metals leached from the sludge-based activated carbon are lower than the maximum allowable value regulated by China and the treatment effect of the sludge-based activated carbon for urban sewage is remarkable.