Abstract:Boron nitride (BN) interfacial layer with controlled thickness and structure was prepared on the surface of near stoichiometric ratio SiC fiber preforms by a chemical vapor deposition process, and the SiC/SiC composites were obtained by polymer precursor infiltration and pyrolysis process. The microstructure of the BN interfacial layer and SiC/SiC composites was tested by scanning electron microscopy, and the mechanical behavior of SiC/SiC composites was characterized by a mechanical properties test. Results showed that BN interfacial layer was evenly distributed in the fiber preforms with excellent thickness consistency. As the thickness of the BN interfacial layer increased, the deflection path of the crack increased gradually, resulting in the flexural strength first increasing and then decreasing. The mechanical behavior mentioned above was mainly attributed to the dual effects of load transfer and crack propagation of the BN interfacial layer; that was, the crack propagation of ceramic matrix under external load lengthened the path of load transfer and formed a large number of fibers bridging and pulling out successively, which contributed to the energy dissipation mechanism.

Study on Gelcasting of Si3N4-SiO2-BN Ceramic Composites and Performance

Study on the Process of Si3N4 Ceramic with High Properties by Gel-casting

Study on Gelcasting of Silicon Nitride-Bonded Silicon Carbide Refractories

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories

Preparation and Properties of Micro porous Si3N4 Ceramics by Gelcasting

Effect of Sintering Additive Content on Mechanical and Dielectric Properties of Porous Si3N4/BN Composite Ceramics

Formation of Silicon Nitride Bonded Silicon Carbide by Aqueous Gelcasting

PREPARING Si3N4 CERAMICS WITH HIGH PERFORMANCES BY GELCASTING (I)INFLUENCE OF COATING Si3N4 POWDER ON MECHANICAL PROPERTIES OF THE MATERIAL

Preparation and properties of porous Si 3N 4/SiO 2/BN composite ceramics

Preparation and characteristics of highly porous BN-Si3N4 composite ceramics by combustion synthesis

Preparation and Properties of Porous Si<sub>3</sub>N<sub>4</sub>/SiO<sub>2</sub>/BN Composite Ceramics

Microstructure and Properties of Si3N4 Based on Gelcasting

Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent

Study On Gelcasting Of Silicon Carbide

Microstructure, phase compositions and mechanical properties of slip cast sintered SiC/Si3N4 composites

Preparation of porous Si 3 N 4 ceramics via tailoring solid loading of Si 3 N 4 slurry and Si 3 N 4 poly-hollow microsphere content

PREPARING Si3N4 CERAMICS WITH HIGH PERFORMANCE BY GELCASTING (II)-INFLUENCE OF CIP, POWDER OXIDIZATION AND GPS SCHEME ON PROPERTIES OF THE MATERIALS

Preparation of Dense Mullite Ceramics through Gelcasting of Alumina Slurry Dispersed in Silica Sol

Gel-casting Without De-Airing Process Using Silica Sol As a Binder

Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites