Abstract:Microstructure and precipitated phase morphology of ZL205A alloy were investigated by centrifugal machine at 1 g、1 000 g、2 000 g、3 000 g、4 000 g(1 g=9.8 m · s-2),and effects of high gravity field on the properties of ZL205A alloy were analyzed.The results reveal that,the high gravity field can reduce segregation defects in ZL205A alloy and refine obviously grain size.In the normal gravitational field of 1 g,the solidification structure in ZL205A alloy presents the large blocky segregation,and the grain size reaches 85 μm.However,the segregation in the high gravity field is decreased with increasing in the high gravity field.When the gravity field reaches 4 000 g,the segregation reaches the lowest,and the grains become equiaxed grain with size of 35 μm.The high gravity field can improve the morphology of precipitated phase θ-phase.When the gravity field is 1 g,the θ-phase presents coarse bulky structure,while in the high gravity field,the θ-phase becomes small blocky structure.The refinement effects is increased with increasing in the gravity field.The hardness of ZL205A can be increased under high gravity field,which is 64.3 HV under normal gravity field,while it is 83.4 HV at 3 000 g.

Fabrication of Bulk Al2o3 by Combustion Synthesis Melt-Casting under Ultra-High Gravity

Preparation of Fe3Al Alloy by Combustion Synthesis Melt-Casting under Ultra-High Gravity

Fabrication of nanostructure Al2O3/ZrO2 (Y2O3) eutectic by combustion synthesis melt-casting under ultra-high gravity

Fabrication of Densified YAG Ceramics by Combustion Synthesis under Ultra-High Gravity

Melt-Casting Of Translucent Mgal2o4 Ceramics By Combustion Synthesis Under High Gravity

Fabrication of an Al2o3/Yag/Zro2 Ternary Eutectic by Combustion Synthesis Melt Casting under Ultra-High Gravity

Rapid Fabrication of Bulk Graded Al2o3/Yag/Ysz Eutectics by Combustion Synthesis under Ultra-High-Gravity Field

Melt-casting of Si–Al–Y–O Glasses and Glass-Ceramics by Combustion Synthesis under High Gravity

Preparation of Y2O3–Al2O3–SiO2 Glasses by Combustion Synthesis Melt–casting under High Gravity

Preparation of Al2O3-ZrO2-SiO2 ceramic composites by high-gravity combustion synthesis

Effects of High Gravity Field on Microstructure and Properties of ZL205A Alloy

Rapid Preparation Of Mgal2o4 Ceramics By High-Gravity Combustion Synthesis

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Rapid production of bulk Al2O3/YAG/YSZ ternary eutectic ceramic by ultra-high-gravity melt-casting

High-Gravity Combustion Synthesis of Al2tio5/Mullite Ceramic Composites

Fabrication of Highly Dense Al2O3 Ceramics

Fast Fabrication of Glass Ceramics by High Gravity Combustion Synthesis

Preparation of W-Ni graded alloy by combustion synthesis melt-casting under ultra-high gravity

Effects of Supergravity Conditions on Combustion Synthesis of NiAl Intermetallies

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field