Abstract:Winglet vortex generators (WVGs) mounted inside a circular tube, generate longitudinal vortices and offer increased turbulence level with a comparatively lower pressure penalty for a higher heat exchange performance. In this study, the thermal enhancement and flow structure arising from radially-arrayed winglets mounted at different attack and inclination angles, as well as different winglet lengths, are analyzed by CFD simulation. The flow and heat transfer behaviors are presented in the turbulent flow region for air flow, with Reynolds number ranging from 6000 to 27,000. Vortex generators are arranged inside the tube as a series of four rings, with each ring having 4 WVGs on the inner surface of a circular tube. The present research investigates the characteristics of WVGs which include four winglet inclination angles (α = 0°, 10°, 20° and 30°), five winglet attack angle (β = 0°, 10°, 20°, 30°, and 45°), and three winglet lengths (L = 10 mm, 15 mm, 20 mm). The data shows that winglets in a tube result in a considerable enhancement of Nusselt number and friction factor. It is found that Nusselt number and friction factor augment with the increase of attack angle or length, yet declines with the increase of inclination angle. The maximum of Nu is 86.88, at L = 20 mm, PR = 4.8, α = 0°, and β = 45°. The largest Nusselt number ratio, Nu/Nu0, defined as a ratio of augmented Nusselt number to the Nusselt number for fully developed smooth flow is 136%, which was obtained at a lower Reynolds number (Re = 6000). The results also illustrated that WVGs could generate longitudinal and transverse vortices to induce both impingement flow and recirculation zone leading to higher heat transfer and comparatively lower pressure drop. Nusselt number contours reveal that the wake zone behind WVGs displays the intensity of heat transfer along the tube.

Experimental Study on Heat Transfer in Ducts with Winglet Disturbances

Experimental Study on Forced Convection Hydraulic and Thermal Characteristics in a Dimpled Flat Duct

Enhanced Heat Transfer with Swirl Duct under Rolling and Pitching Environment

Effects of inlet turbulence intensity on wall heat transfer in a turbine guide vane

Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids

Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger

Numerical simulation study of enhanced convective heat transfer in the tube based on winglet vortex generator

Numerical Investigation of Enhanced Heat Transfer in a Rectangular Channel with Winglets

The heat transfer enhancement with a flag-shaped flexible wing

Heat transfer enhancement mechanism of elliptical cylinder for minichannels with delta winglet longitudinal vortex generators

Aerothermal performance improvement by cross and X ribbed stripes

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Numerical study of heat transfer and flow behavior in a circular tube fitted with varying arrays of winglet vortex generators

Novel self-join winglet vortex generators for enhanced heat transfer of turbulent airflow in round tubes

Thermal-hydraulic performance in a tube with punched delta winglets inserts in turbulent flow

Enhancement of heat transfer performance of a channel flow using modified delta Winglet vortex generator

Heat Transfer Augmentation and Flow Visualization With Delta Winglets in a Tube: A Numerical Approach

Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator pairs

Characterization of heat transfer and friction loss of water turbulent flow in a narrow rectangular duct under 25-40 kHz ultrasonic waves

The optimal longitudinal location of curved winglets for better thermal performance of a finned-tube heat exchanger

Thermal performance in latticework ducts with various endwall shapes for aero-craft turbine cooling