Abstract:Winglet vortex generators (WVGs) mounted inside a circular tube, generate longitudinal vortices and offer increased turbulence level with a comparatively lower pressure penalty for a higher heat exchange performance. In this study, the thermal enhancement and flow structure arising from radially-arrayed winglets mounted at different attack and inclination angles, as well as different winglet lengths, are analyzed by CFD simulation. The flow and heat transfer behaviors are presented in the turbulent flow region for air flow, with Reynolds number ranging from 6000 to 27,000. Vortex generators are arranged inside the tube as a series of four rings, with each ring having 4 WVGs on the inner surface of a circular tube. The present research investigates the characteristics of WVGs which include four winglet inclination angles (α = 0°, 10°, 20° and 30°), five winglet attack angle (β = 0°, 10°, 20°, 30°, and 45°), and three winglet lengths (L = 10 mm, 15 mm, 20 mm). The data shows that winglets in a tube result in a considerable enhancement of Nusselt number and friction factor. It is found that Nusselt number and friction factor augment with the increase of attack angle or length, yet declines with the increase of inclination angle. The maximum of Nu is 86.88, at L = 20 mm, PR = 4.8, α = 0°, and β = 45°. The largest Nusselt number ratio, Nu/Nu0, defined as a ratio of augmented Nusselt number to the Nusselt number for fully developed smooth flow is 136%, which was obtained at a lower Reynolds number (Re = 6000). The results also illustrated that WVGs could generate longitudinal and transverse vortices to induce both impingement flow and recirculation zone leading to higher heat transfer and comparatively lower pressure drop. Nusselt number contours reveal that the wake zone behind WVGs displays the intensity of heat transfer along the tube.

The optimal longitudinal location of curved winglets for better thermal performance of a finned-tube heat exchanger

Performance optimization of a wavy finned-tube heat exchanger with staggered curved vortex generators

Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger

Thermo-hydraulic performance and exergy analysis of a fin-and-tube heat exchanger with sinusoidal wavy winglet type vortex generators

Thermal-hydraulic characteristic of a novel wavy fin-and-circle tube heat exchanger with concave curved vortex generators

Thermal performance assessment in a fin-and-oval-tube heat exchanger with delta winglet vortex generators

Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers

Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger

Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators

Parameters Optimization of Fin-and-Tube Heat Exchanger with a Novel Vortex Generator Fin by Taguchi Method

Significance of delta winglets on the air side performance of flat finned versus wavy finned-tube heat exchangers

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Design and optimization on symmetrical wing longitudinal swirl generators in circular tube for laminar flow

Effects of Rectangular Wing Vortex Generators on the Thermal-Hydraulic Performance of Louvered Fin and Flat Tube Heat Exchanger

Multi-objective Optimization of Heat Transfer Performance of H-type Fin with Vortex Generator Based on NSGA-II

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger

Numerical Study of Thermal Performance on Fin and Tube Heat Exchanger with Flat Rectangular and Sinusoidal Winglet Vortex Generators

Numerical investigation of heat transfer and flow resistance characteristics of interpenetrated flying-wing finned tubes

A Numerical Study of Flow and Heat Transfer Enhancement Using an Array of Delta-Winglet Vortex Generators in a Fin-and-Tube Heat Exchanger

Numerical study of heat transfer and flow behavior in a circular tube fitted with varying arrays of winglet vortex generators