Abstract:Average convective heat transfer on the top and bottom surfaces of a plain plate and four plates with a pair of delta winglet longitudinal vortex generator punched directly from the plates at attack angles of 15°, 30°, 45° and 60° respectively, is experimentally and numerically studied in the present paper. The plate fixed horizontally in the center of the tested channel is designed to simulate the forced heat transfer on the both surfaces of a single piece of fin in a fin-tube heat exchanger. Experimental results show that the average Nusselt number on the surfaces of plate increases with the increase of the attack angle of delta winglet pair compared with that of plain plate without delta winglet pair in the test range. The average Nusselt number of the plate with attack angle of 60° is slightly higher than that of plate with attack angle of 45°, yet may bring larger pressure drop. Strong longitudinal vortices are visualized when air flow across the leading-edges of the winglet pair. And a portion of air stream flows into the lower channel through the punched holes on the plates after rushing at the frontal face of delta winglet, and disturbs the flow field of the lower channel further. The heat transfer in the tested channel of five cases is also numerically investigated. Variance of average Nusselt number between the numerical results and experimental results for the five cases are all less than 10%, validating the present models and methods used for the simulation of fin channel flow with punched vortex generators feasible and reliable. The computed velocity and temperature fields are analyzed to understand the details of fin channel flow with longitudinal vortex generator. The experimental and numerical results reveal that the transverse flow of air stream through the punched holes disturbs the air flow in the lower channel, enhancing the heat transfer on the under surface of fin.

Enhancement of heat transfer performance of a channel flow using modified delta Winglet vortex generator

Numerical investigation of heat transfer using a novel punched vortex generator

Heat transfer enhancement mechanism of elliptical cylinder for minichannels with delta winglet longitudinal vortex generators

Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger

Heat Transfer Augmentation and Flow Visualization With Delta Winglets in a Tube: A Numerical Approach

Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator pairs

HEAT TRANSFER ENHANCEMENT IN A CHANNEL WITH LONGITUDINAL VORTEX GENERATORS AND FIELD SYNERGY PRINCIPLE ANALYSIS

Impact of Delta Winglet Vortex Generators on the Performance of a Novel Fin-Tube Surfaces with Two Rows of Tubes in Different Diameters

Numerical study of heat transfer and flow behavior in a circular tube fitted with varying arrays of winglet vortex generators

Heat transfer and flow characteristics in a rectangular channel with combined delta winglet inserts

Numerical study on laminar convection heat transfer in a channel with longitudinal vortex generator. Part B: Parametric study of major influence factors

Hydrodynamics and heat transfer characteristics of a novel heat exchanger with delta-winglet vortex generators

Numerical Investigation of Enhanced Heat Transfer in a Rectangular Channel with Winglets

Numerical Study on Laminar Convection Heat Transfer in a Rectangular Channel with Longitudinal Vortex Generator . Part A : Verification of Field Synergy Principle

Numerical Analysis on Heat Transfer Enhancement by Longitudinal Vortex Based on Field Synergy Principle

Thermal performance assessment in a fin-and-oval-tube heat exchanger with delta winglet vortex generators

Numerical simulation study of enhanced convective heat transfer in the tube based on winglet vortex generator

Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers

Numerical study of fluid flow and heat transfer in a flat-plate channel with longitudinal vortex generators by applying field synergy principle analysis

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger

Effect of longitudinal vortex generator on heat transfer in rectangular channels