Abstract:Electron microprobe trace element analysis is a significant challenge. Due to the low net intensity of peak measurements, the accuracy and precision of such analyses relies critically on background measurements, and on the accuracy of any pertinent peak interference corrections. A linear regression between two points selected at appropriate background positions is a classical approach for electron probe microanalysis (EPMA). However, this approach neglects the accurate assessment of background curvature (exponential or polynomial), and the presence of background interferences, a hole in the background, or an absorption edge can dramatically affect the results if underestimated or ignored. The acquisition of a quantitative wavelength-dispersive spectrometry (WDS) scan over the spectral region of interest remains a reasonable option to determine the background intensity and curvature from a fitted regression of background portions of the scan, but this technique can be time consuming and retains an element of subjectivity, as the analyst has to select areas in the scan which appear to represent background. This paper presents a new multi-point background (MPB) method whereby the background intensity is determined from up to 24 background measurements from wavelength positions on either side of analytical lines. This method improves the accuracy and precision of trace element analysis in a complex matrix through careful regression of the background shape, and can be used to characterize the background over a large spectral region covering several elements to be analyzed. The overall efficiency improves as systematic WDS scanning is not required to assess background interferences. The method is less subjective compared to methods that rely on WDS scanning, including selection of two interpolation points based on WDS scans, because "true" backgrounds are selected through an exclusion method of possible erroneous backgrounds. The first validation of the MPB method involves blank testing to ensure the method can accurately measure the absence of an element. The second validation involves the analysis of U-Th-Pb in several monazite reference materials of known isotopic age. The impetus for the MPB method came from efforts to refine EPMA monazite U-Th-Pb dating, where it was recognized that background errors resulting from interference or strong background curvature could result in errors of several tens of millions of years on the calculated date. Results obtained on monazite reference materials using two different microprobes, a Cameca SX-100 Ultrachron and a JEOL JXA-8230, yield excellent agreement with ages obtained by isotopic methods (Thermal Ionization Mass Spectrometry [TIMS], Sensitive High-Resolution Ion MicroProbe [SHRIMP], or Secondary Ion Mass Spectrometry [SIMS]). Finally, the MPB method can be used to model the background over a large spectrometer range to improve the accuracy of background measurement of minor and trace elements acquired on a same spectrometer, a method called the shared background measurement. This latter significantly improves the accuracy of minor and trace element analysis in complex matrices, as demonstrated by the analysis of Rare Earth Elements (REE) in REE-silicates and phosphates and of trace elements in scheelite.

Improved ICP-OES analysis of trace calcium in rare-earth matrices with the use of iterative target transformation factor analysis and Kalman filter

Elimination of the Spectral Interference from Polyatomic Ions with Rare Earth Elements in Inductively Coupled Plasma Mass Spectrometry by Combining Algebraic Correction with Chromatographic Separation

Determination of Trace Elemental Composition of CaCO3: Application to Mass Limited Abiogenic and Biogenic Carbonates

Enhanced ICP-MS detection of 24 elemental impurities in complex, high matrix mineral, medicinal lanthanum carbonates according to ICH Q2 (R2)

Determination of 14 trace rare earth impurities in high-purity CeO2 by inductively coupled plasma mass spectrometry with membrane desolvation

Determination of 14 Trace Rare Earth Impurities in High-Purity Europium Oxide by Inductively Coupled Plasma Mass Spectrometry with Membrane Desolvation

Matrix overcompensation calibration: a new strategy to correct matrix effects of carbon origin in multielement analysis by inductively coupled plasma mass spectrometry

Possibilities of High Resolution Inductively Coupled Plasma Optical Emission Spectrometry in the Determination of Trace Elements in Environmental Materials

Selection of internal standards in inductively coupled plasma atomic emission spectrometry by principal component analysis

A Modified Standard Addition Method and Its Application in ICP Emission Spectrometry

Multipoint Background Analysis: Gaining Precision and Accuracy in Microprobe Trace Element Analysis

A practical approach to non-spectral interferences elimination in inductively coupled plasma optical emission spectrometry

Fast and Simultaneous Determination of Calcium and Phosphorous in Calcium Phosphate Based Bioceramics by ICP-AES

Combined use of multiple external and internal standards in LA-ICP-MS analysis of bulk geological samples using lithium borate fused glass

The Saha Ionisation Equilibrium Shift Correction Model Applied to MPT-OES for Analysing of Complex Matrix Samples: an Example for Brine Samples

Accurate determination of ultra-trace rare earth elements by LA-ICP-MS/MS and its application to cassiterite for effective elimination of Gd and Tb false positive anomalies

Research Progress in Rare Earth Determination by Inductively Coupled Plasma Mass Spectrometry

Development of a novel strategy for the quantification of ultra-trace impurity elements in high-purity magnesium using inductively coupled plasma tandem mass spectrometry

High-Precision Measurements of 44ca/40ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry Without Collision-Cell Technology.

A Non-Matrix-Matched Calibration Method for In Situ Major and Trace Element Analysis of Scheelite by Nanosecond LA-ICP-MS

Development of Methods for Sample Preparation and Introduction into Excitation and Ionization Sources for Combined Procedures of Atomic Emission and Mass Spectral Analysis