Synthesis and Properties of Magnetite-Dispersed Carbon by Pressure Pyrolysis of Divinylbenzene Vinylferrocene with Water

Toshinobu Yogo,Shigeharu Naka,Shin-Ichi Hirano
DOI: https://doi.org/10.1007/bf02385429
IF: 4.5
1989-01-01
Journal of Materials Science
Abstract:Magnetite-dispersed carbon was synthesized by pressure pyrolysis of the divinylbenzene-vinylferrocene system in the presence of water at 125 MPa below 700°C. Supercritical water influenced the phase separation of oligomers formed during the pyrolysis to give carbons with various morphologies, such as spherulitic, coalescing spherulitic and polyhedral carbon, depending upon the concentration of water. Carbon spherulites from 5 to 10 μm diameter dispersed with magnetite particles (<100 nm) were synthesized by pyrolysis of divinylbenzene-5.1 mol% vinylferrocene and 20.0 wt% water at 550°C and 125 MPa. The specific area of magnetite-dispersed carbon synthesized at 600°C and 125 MPa was 92 m2g−1 after heat treatment at 800°C for 1 h. The specific area of the carbon specimen increased with decreasing pyrolysis temperature of the parent copolymers from 700 to 550°C. The Curie temperature of magnetite-dispersed carbon was 585°C. Magnetite dispersed in the carbon matrix was reduced to wüstite during the further heat treatment in vacuum. The saturation magnetization of magnetite-dispersed carbon was 79% of the theoretical value, and changed in proportion to the concentration of iron in the carbon matrix.
What problem does this paper attempt to address?