Abstract:The (BiMgFeO4/activated carbon) composite has been developed deploying glycine as fuel in a self-combustion process. It was employed to remove methyl green (MG), a cationic dye, and methyl orange (MO), an anionic dye, from aqueous solutions. It was characterized by specific surface area measurement (BET), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). FTIR spectra showed three bands located around 548.18 cm-1, 973. cm-1, and 1577.01 cm-1 attributed to the stretching vibrations of Bi-O, Fe-O, Mg-O, and O-H, respectively. The SEM images revealed a highly porous and irregular structure beneficial for the effective diffusion of dye molecules. The sample contains a notable proportion of holes with different sizes of pores. The microcavities observed on the adsorbent surface were conducive to good diffusion of the dye molecules. The composite's mesoporous structure was deduced by BET analysis, which allowed us to determine the material's specific surface area of 20.289 m2/g and its pore diameter of 7.54 nm. X-ray diffraction showed peaks attributed to Fe3O4, MgO, and Bi2O3 (confirming the presence of BiMgFeO4 ferrite) and other peaks attributed to dehydrated hemicellulose and carbon/graphite (confirming the use of activated carbon). The various experimental parameters affecting the performance of this reaction, such as temperature, contact time, initial dye concentration, and adsorbent mass, were studied. The composite's pH zero charge point (pHPZC) was found to be 8.77. The equilibrium isotherms were described using the Freundlich and Langmuir adsorption models. The equilibrium time was a function of the starting dye concentration in the adsorption tests. Adsorption equilibrium for (BiMgFeO4/activated carbon) was formed after 120 min, according to adsorption kinetic analysis. Moreover, the results revealed that pseudo-second-order kinetics could correctly characterize the adsorption of MO and MG on the composite. Adsorption isotherms confirmed that the adsorption process of both dyes onto the (BiMgFeO4/activated carbon) composite was successful. The Langmuir model appears to be best suited to the adsorption of MO and MG on the(BiMgFeO4/activated carbon), with a maximum adsorption capacity of 196.078 mg.g-1 and 192.307 mg.g-1 respectively, at 298 K. The adsorption of the two dyes was spontaneous and exothermic, in line with the thermodynamic parameters associated with the sorbent/adsorbate system. The determination of the isosteric heat of adsorption revealed that physisorption takes place with weak intermolecular interactions between the two dyes and the composite surface.

Synthesis, properties, and application of a graphitized magnetic carbon composite made from FeCl3-activated flax shive

Cordierite Reinforced Graphite Nanocomposite with Superior Adsorption Capacity Synthesized by In-Situ Carbon-Bed Pyrolysis Method

Magnetic carbon nanocomposites via the graphitization of glucose and their induction heating

Synthesis and properties of graphene-like porous carbon from modified cellulose

Investigation on the micro-structure and adsorption capacity of cellulosic biomass carbon based montmorillonite composite

General synthesis of magnetic mesoporous FeNi/graphitic carbon nanocomposites and their application for dye adsorption

Micro-structure, Surface Properties and Adsorption Capacity of Ball-Milled Cellulosic Biomass Derived Biochar Based Mineral Composites Synthesized Via Carbon-Bed Pyrolysis

Characteristic and Mechanistic Study of Enhanced Carbon-Based Synfuel from Biomass and Coal by Magnetite Additive for Synergistic Co-Carbonization Technology.

Synthesis and Properties of Magnetically Susceptible Porous Carbon Materials Based on Hydrolysis Lignin Modified with ZnCl2 and FeCl3

Magnetic Fe-doping G-C3n4/graphite: the Effect of Supporters and the Performance in Fenton-like Reactions

A simple melamine-assisted cellulose pyrolysis synthesis of magnetic and mesoporous N-doped carbon composites with excellent adsorption of Congo red

Cellulose-supported magnetic Fe3O4–MOF composites for enhanced dye removal application

Electrospun magnetic carbon composite fibers: Synthesis and electromagnetic wave absorption characteristics

Preparation of a novel magnetic composite based on rice straw derived biochar and chromium ferrite for enhanced absorption of organic dye

Removal of Cationic and Anionic Dyes from Textile Waste Effluent using a Magnetic Nanocomposite made of Activated Carbon and Magnesium-Doped Bismuth Ferrite

Synthesis, characterization and adsorption capacity of magnetic carbon composites activated by CO2: implication for the catalytic mechanisms of iron salts

Preparation of Carbon–Iron Composites Materials and Studies of Its Adsorption Properties for the Methylene Blue

Magnetic carbon xerogel: efficient adsorbent for removing methylene blue dye

Preparation of magnetic solvent-free carbon nanotube/Fe 3 O 4 nanofluid sizing agent to enhance thermal conductivity and interfacial properties of carbon fiber composites

Fabrication of magnetic activated carbon from corn-cob biomass for the removal of acidic dyes from wastewater

Reaction kinetics, mechanism, and product analysis of the iron catalytic graphitization of cellulose