Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Preparation of epoxidized rubber using a reactive processing technique. I. Synthesis and characterization of epoxidized polybutadiene rubber

Facile Synthesis of Novel HTPBs and EHTPBs with High Cis-1,4 Content and Extremely Low Glass Transition Temperature

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Cleavable Polybutadiene Rubber: A Versatile Precursor to Hydroxyl-Terminated or Multi-Hydroxyl Polybutadiene and Polyethylene

Facile Access To Carboxyl-Terminated Polybutadiene And Polyethylene From Cis-Polybutadiene Rubber

Preparation of Hydroxyl-Terminated Polybutadiene with High Cis-1,4 Content

Polybutadiene Vitrimers with Tunable Epoxy Ratios: Preparation and Properties

110Th Anniversary: the Epoxidation of Polybutadiene Via Reaction-Controlled Phase-Transfer Catalysis

Synthesis and Characterization of Epoxidized Butyl Rubber

Catalytic epoxidation of nitrile rubber in reactive processing equipment

Preparation Of Recyclable Polybutadiene Rubber Based On Acid-Base Complexation

Preparation of epoxidized hydroxyl-terminated polybutadiene by acetic acid peroxide in-situ

Preparation and Properties of Epoxidized Acrylonitrile-butadiene Rubber/carboxylic Carbon Nanotubes Composites

Epoxidation Of Unsaturated Rubbers With Alkyl Hydroperoxide Using Molybdenum Compounds As Catalyst In The Reactive Processing Equipment

Reaction kinetics of synthesis of epoxidized hydroxyl-terminated polybutadiene

In situ epoxidation of ethylene propylene diene rubber by performic acid

Epoxidation of ethylene propylene diene rubber by t-butyl hydroperoxide in the presence of molybdenum oxide

Introducing Mechanochemistry into Rubber Processing: Green-Functionalized Cross-Linking Network of Butadiene Elastomer

SYNTHESIS AND CHARACTERIZATION OF EPOXIDISED NATURAL RUBBER

Epoxidation of 1,2‐Polybutadiene and Its Dielectric, Thermal, and Mechanical Properties

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber