Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Epoxidation of 1,2‐Polybutadiene and Its Dielectric, Thermal, and Mechanical Properties

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Facile Access To Carboxyl-Terminated Polybutadiene And Polyethylene From Cis-Polybutadiene Rubber

Polymerization of 1,3-Butadiene Catalyzed by Ion-Pair Cobalt Complexes with (benzimidazolyl)pyridine Alcohol Ligands

Cleavable Polybutadiene Rubber: A Versatile Precursor to Hydroxyl-Terminated or Multi-Hydroxyl Polybutadiene and Polyethylene

Synthesis of Carboxyl-terminated Polyolefins <i>via</i> Metathesis Degradation-hydrogenation of Diene Rubbers

Facile Synthesis of Novel HTPBs and EHTPBs with High Cis-1,4 Content and Extremely Low Glass Transition Temperature

Synthesis and Characterization of Linear-shaped and 3-Arm Star-shaped Hydroxyl-terminated Polybutadiene via Living Anionic Polymerization

110Th Anniversary: the Epoxidation of Polybutadiene Via Reaction-Controlled Phase-Transfer Catalysis

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Greatly Enhanced Thermo-Oxidative Stability Of Polybenzoxazine Thermoset By Incorporation Of M-Carborane

Structure, Mechanical Properties, and Gas Permeability of Elastomers Based on Polybutadiene and Epoxy Resin

Rigid Biphenyl-Contained Epoxy Resins with Improved Thermal Resistant Properties

Epoxidation modification of strictly alternating copolymer via living and controlled anionic alternating copolymerization of 1,3-pentadiene and styrene derivatives

Photocrosslinking of an Ethylene–propylene–diene Terpolymer and the Characterization of Its Structure and Mechanical Properties

Thermal and Mechanical Properties of Poly(butylene Terephthalate)/epoxy Blends

Reaction Kinetics, Thermal Properties of Tetramethyl Biphenyl Epoxy Resin Cured with Aromatic Diamine

Effect of Electronegativity and Steric Hindrance of the Cocatalyst on the Activity and Selectivity of Butadiene Polymerization Catalyzed by Molybdenum

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Thermal, mechanical and dielectric property enhancement of benzoxazine-containing phthalonitrile resin: The effect of functional oligomeric polyphenyl ether

Synthesis, Cationic Polymerization and Curing Reaction with Epoxy Resin of 3,9-Di(p-methoxy-benzyl)-1,5,7,11-tetra-oxaspiro(5,5)undecane