Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Reaction kinetics of synthesis of epoxidized hydroxyl-terminated polybutadiene

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Facile Synthesis of Novel HTPBs and EHTPBs with High Cis-1,4 Content and Extremely Low Glass Transition Temperature

Cleavable Polybutadiene Rubber: A Versatile Precursor to Hydroxyl-Terminated or Multi-Hydroxyl Polybutadiene and Polyethylene

Preparation of Hydroxyl-Terminated Polybutadiene with High Cis-1,4 Content

Facile Access To Carboxyl-Terminated Polybutadiene And Polyethylene From Cis-Polybutadiene Rubber

Synthesis, Chemical Modifications and Applications of Hydroxyl-Terminated Polybutadiene

Preparation of epoxidized hydroxyl-terminated polybutadiene by acetic acid peroxide in-situ

Synthesis of HTPB with High cis-1,4 Content from PBD Original Solution

Kinetics and Modeling of Melt Polycondensation for Synthesis of Poly[(butylene Succinate)‐co‐(butylene Terephthalate)], 1 – Esterification

110Th Anniversary: the Epoxidation of Polybutadiene Via Reaction-Controlled Phase-Transfer Catalysis

Synthesis and Nonisothermal Reaction of A Novel Acrylonitrile-Capped Poly(Propyleneimine) Dendrimer with Epoxy Resin

Study on Synthesis of Polyhydroxylated Polybutadiene

Synthesis of epoxidized hydroxyl-terminated polybutadiene/tolylene diisocyanate polyurethane

Kinetics on the Synthesis of Hexafluoropropylene Oxide

Kinetic study of HTPB (Hydroxyl Terminated Polybutadiene) Synthesis Using Infrared Spectroscopy

STUDY OF THERMAL STABILITY OF HYDROXYL TERMINATED POLYBUTADIENE

Preparation of epoxidized rubber using a reactive processing technique. I. Synthesis and characterization of epoxidized polybutadiene rubber

Synthesis and Kinetics of Polyurethane-Acrylate Oligomer

Multiphase Reaction Kinetics of Epoxidation of Polyisobutene

KINETICS OF PROPYLENE EPOXIDATION OVER TS-1 IN T-Butyl ALCOHOL