Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Synthesis and Characterization of Epoxidized Butyl Rubber

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Facile Access To Carboxyl-Terminated Polybutadiene And Polyethylene From Cis-Polybutadiene Rubber

Polybutadiene Vitrimers with Tunable Epoxy Ratios: Preparation and Properties

Epoxidation Functionalized Isobutylene Isoprene Rubber toward Green-curing Pathway and High-performance Composites

110Th Anniversary: the Epoxidation of Polybutadiene Via Reaction-Controlled Phase-Transfer Catalysis

Preparation of epoxidized rubber using a reactive processing technique. I. Synthesis and characterization of epoxidized polybutadiene rubber

Study on epoxidation of a low molecular weight polyisobutylene catalyzed by ion exchange resin

SYNTHESIS AND CHARACTERIZATION OF EPOXIDISED NATURAL RUBBER

Synthesis and Characterization of Epoxidized Natural Rubber Latex with Different Epoxide Content

The Effect of Epoxidation on Strain-Induced Crystallization of Epoxidized Natural Rubber.

Epoxidation of Styrene-Isoprene-styrene Block Copolymer and Research on Its Reaction Mechanism

In Situ Efficient End Functionalization of Polyisoprene by Epoxide Compounds via Neodymium-Mediated Coordinative Chain Transfer Polymerization

Introducing Mechanochemistry into Rubber Processing: Green-Functionalized Cross-Linking Network of Butadiene Elastomer

Epoxidation of 1,2‐Polybutadiene and Its Dielectric, Thermal, and Mechanical Properties

Structural regulation and property balancing of ethylene‐propylene‐diene monomer‐based‐ oil‐absorbing expandable rubber modified with flexible α‐olefins

Structure Characterization of Liquid Polyisoprene

Synthesis of epichlorohydrin rubber with triisobutylaluminum/anhydrous phosphoric acid/1, 8-diazo-bicyclo [5.4.0]undecene-7 catalytic system

In situ epoxidation of ethylene propylene diene rubber by performic acid

Preparation and Characterization of Epoxidized Styrene—Isoprene—Styrene Tri-block Copolymer Using Formic Acid—Hydrogen Peroxide

Synthesis and evaluation of a novel isobulylene-isoprene rubber slurry stabilizer