Abstract:The aim of the present paper is to review our work on plasma‐surface interactions during the etching of silicon gates in low pressure high density HBr/Cl2/O2 based plasmas. In integrated circuit manufacturing, the transfer of patterns onto the polysilicon layer relies on the formation of a passivation layer on sidewalls of the etched features, which protects the silicon gate sidewall fromisotropic etching. At the same time, a layer with an almost identical chemical composition is also deposited on the reactor walls and can modify the process parameters by changing the radicals' surface loss probability. In this work we use a new “plasma etching‐sputtering” diagnostic technique, involving a subsequent “mild etching” of the layer deposited on the chamber walls by a few % SF6‐containing Ar plasma. Thus we investigate the chemical composition of this layer. This chemical composition is deduced from the time variation of the gas phase concentration of different atoms and radicals, the etch products of the wall deposited layer, monitored during the “mild etching” of the layer by time‐resolved optical emission spectroscopy and mass spectrometry. Optical absorption spectroscopy and mass spectrometry have been employed to characterize the HBr/Cl2/O2 plasma, currently used for the gate etching, and to estimate the absolute flux of neutral and ionic deposition precursors reaching the reactor walls. It comes out that the silicon wafer etch byproducts, SiClx radicals (x < 2) and SiOyCl+x ions, are the main depositing agents. Finally, the chemical topography analysis method, based on the X‐ray photoelectron spectroscopy, has been used to determine the chemical composition of the layer formed on the sidewalls of the silicon etched features. We show that the layers deposited on the sidewalls and on the chamber walls are both silicon oxyhalogenides (SiOyClx) compounds, formed by the subsequent oxidation of the deposited silicon chloride etching by‐products. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

Direct Measurement of Sidewall Roughness on Si, Poly-Si and Poly-Sige by AFM

A strategy to fabricate nanostructures with sub-nanometer line edge roughness

Polysilicon gate etching in high density plasmas. V. Comparison between quantitative chemical analysis of photoresist and oxide masked polysilicon gates etched in HBr/Cl2/O2 plasmas

Study of the Nanometer Scale Polysilicon Micro Structure Etching

Image analysis development for optimization of 4H–SiC trench recovery treatment by combination of gas etching and sacrificial oxidation approaches

Reactive ion Etching of SiO2 and Mo Sidewall Profile Process

Photoresist Process Simulation to Study Line Edge Roughness

Correlation and Interaction between Sidewall Passivation and Chamber Walls Deposition During Silicon Gate Etching

Atomic layer etching of SiO$_2$ using sequential exposures of Al(CH$_3$)$_3$ and H$_2$/SF$_6$ plasma

Comparison of glancing-angle scatterings on different materials in a high aspect ratio plasma etching process using molecular dynamics simulation

Reactive ion etching of SiGe alloys using HBr

Effect on Etch Rate and Surface Roughness of Crystal Orientation of Polycrystalline Silicon Used for Consumable Parts of Reactive Ion Etching Equipment

Microscale pattern etch of 4H–SiC by inductively coupled plasma

Reactive Ion Etching of Si1−xGex Alloy with Hydrogen Bromide

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Effect of Isopropyl Alcohol Concentration and Etching Time on Wet Chemical Anisotropic Etching of Low-Resistivity Crystalline Silicon Wafer

Measurement of Ehrlich-Schwoebel barrier contribution to the self-organized formation of ordered surface patterns on Ge(001)

Effects of plasma conditions on the shapes of features etched in Cl2 and HBr plasmas. I. Bulk crystalline silicon etching

Chemical Mechanical Polishing (CMP) of On-Axis Si-face 6H-Sic Wafer for Obtaining Atomically Flat Defect-Free Surface

Measurement of Plasma Etch-Induced Damage to Silicon Beneath Si0 2 Layer: Effective Range of Plasma Etch Damage Through Si0 2

Achievement of a near-perfect smooth silicon surface