Effect of dust layer in electrostatic precipitators on discharge characteristics and particle removal
Chenghang Zheng,Hao Zhang,Xintao Liu,Yifan Wang,Wenchao Gao,Hao Zheng,Deshan Sun,Xiang Gao
DOI: https://doi.org/10.1016/j.fuel.2020.118335
IF: 7.4
2020-10-01
Fuel
Abstract:<p>Charged particles were deposited on collection plates to form a dust layer in electrostatic precipitator (ESP). In turn, the dust layer could affect the performance of ESP strongly. In this work, the effect of the dust layer on the discharge characteristics and space electric strength was investigated under the different discharge gaps, thickness, and resistivity of the dust layer at temperatures that ranges of 50 °C to 400 °C. Results indicate that an abnormal discharge called back corona was observed as the voltage increased, and its onset voltage would decrease under thick dust layer, short discharge gap, and high temperature and resistivity of the dust layer. When voltage was lower than the onset voltage of the back corona, the discharge current of the stable discharge would increase with temperature but decrease as discharge gap, resistivity, and thickness of dust layer increased. Moreover, the space electric strength of stable discharge was significantly higher than that of the back corona. Space electric strength was strongly correlated with the resistivity of the dust layer. When resistivity increased, a region where the space electric strength reduced rapidly was observed. When resistivity increased from 6.27 × 10<sup>9</sup> Ω·cm to 8.45 × 10<sup>10</sup> Ω·cm, the space electric strength decreased by 33.8% at 50 °C under voltage between electrodes of 22 kV. These variations in space electric strength support the possible decrease in migration velocity as resistivity increased, especially at high resistivity. The criteria for migration velocity deterioration were proposed for instructing ESP design and operation.</p>
energy & fuels,engineering, chemical