Experimental study of the collection efficiency of three configurations of blades-plates-type electrostatic precipitators
N. Hebbar,H. Aitsaid,M. Aissou,H. Nouri,T. Zeghloul,N. HebbarH. AitsaidM. AissouH. NouriT. Zeghloula Laboratoire Structures Intelligentes "SSL",University of Ain Temouchent,Ain Temouchent,Algeriab Electrical Engineering Department,University of Ain Temouchent,Ain Temouchent,Algeriac Electrical Engineering Laboratory,University of Bejaia,Bejaia,Algeriad Electrical Engineering and Automatic Department,University of Relizane,Relizane,Algeriae Electrical Engineering Department,University of Setif-1,Setif,Algeriaf PPRIME Institute,CNRS,University of Poitiers,ISAE,ENSMA,IUT,Angoulême,France
DOI: https://doi.org/10.1080/02726351.2024.2320098
IF: 2.628
2024-03-02
Particulate Science And Technology
Abstract:This paper presents the results of an experimental investigation of the influence of electrode configuration on corona discharge and particle collection under ambient climatic conditions in Blade-to-Plane Electrostatic Precipitator (BP-ESP). In an experimental-scale electrostatic precipitator (BP-ESP), electrodes of different shapes (blade, saw blade with small tooth, and saw blade with large tooth) were tested. The experiments were performed with three types of dust particles having a mean size of about 5 μm, 10 μm, and 45 μm. An aerosol spectrometer was used to characterize the chemical composition of these dust particles injected into the ESP. Different DC-applied voltages have been taken into account for both positive and negative polarities. Results showed that a high current was generated with a saw blade electrode with large teeth which increased the particle collection efficiency, for both polarities. The negative corona discharge is overall more effective than the positive one for the different configurations of electrodes and dust particles used.
engineering, chemical