Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Development of Numerical Simulation Techniques of Cold Ring Rolling Process

Progress and Prospects of FE Simulation of Two-roll Cross Piercing Process

Theoretical Analysis and Numerical Simulation of External Spline Cold Rolling

Mechanics Analysis and Numerical Simulation on the Precise Forming Process of Spline Cold Rolling

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

A Numerical Simulation Method for Calculating the Roundness of Cold Rolling Ring

A Hybrid of Theory and Numerical Simulation Research for Virtual Rolling of Double-Groove Ball Rings

Numerical Simulation for Forging Process of Bearing Rings

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

The Numerical Simulation of Wheel Rim Roll Forming

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Numerical simulation and experimental study on geometry variations and process control method of vertical hot ring rolling

Numerical Simulation as a Tool for the Study, Development, and Optimization of Rolling Processes: A Review

Review of Numerical Research on Roll Forming and Key Problems in Whole Process Simulation

Theoretical Calculation and Simulation Analysis on Rolling Contact Area of External Spline Cold Rolling

Numerical Simulation and Parameter Design of Strip Cold Rolling Process of 301L Stainless Steel in 20-Roll Mill

Numerical simulation of cold longitudinal asymmetric rolling process

Numerical Research on the Electrical Contact Model and Thermal Analysis of the Roll-Ring

Numerical Simulations of Friction Stir Welding Process and Subsequent Post Weld Cold Rolling Process

AN OVERALL NUMERICAL SIMULATION OF HOT METAL FORMING

Research of Couple of Key Techniques in Numerical Simulation of 3D Metal Extrusion Processes