Abstract:This paper presents a ductility-centred analytical model for robustness assessment of axially restrained double-span steel beam systems further to sudden columns loss. The main benefit of the model is its ability of linking the response of semi-rigid beam-to-column joints to the load carrying capacity of the system, and in addition, the model supports the use of codified methods for joint response. The analytical model is first validated through comparisons against detailed double-span FE models, where it is found that the load-joint rotation responses of the axially restrained systems can be accurately captured by the analytical model, especially at catenary stages. Comparisons are also made against the FE results excluding the axial restraints. The axial restraints are shown to play a crucial role in the development of catenary action. Following the verification study, the analytical predictions of the double-span beam systems with varying parameters were further presented and discussed, and an illustrative design example was finally given to clearly demonstrate the practical use of the analytical model for robustness assessment of building frames. The analytical model is design effective and hand-calculable, and thus it brings convenience to robustness assessment of structures in practice. The proposed method may be considered as a feasible alternative method to detailed nonlinear dynamic analysis.

Buckling of laterally and torsionally braced beams

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

Elastic Buckling of Inter-Braced Parallel Beam Systems

Out-of-plane stability of simply supported beams with knee braces

Buckling of Frames Braced by Flexural Bracing

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Lateral resistance of moment resisting-chevron braced frames with weak beams

A Controversy and Its Settlement in the Calculation of Buckling Moments of Thin-walled Beams with Monosymmetrical I-sections under Distributed Loads

An Analysis of Current Stability Theories for Thin-Walled Members

Flexural-torsional Elastic Buckling of Tapered Beams with Simple Support

The Stability of Weakly Braced Frames

A New Derivation of the Buckling Theory of Thin-Walled Beams

STABILITY OF DOUBLY SYMMETRIC I-SECTIONAL CANTILEVERS WITH DIFFERENT BOUNDARY CONDITIONS AT TIP

Elastic flexural-torsional buckling of thin-walled cantilevers

BUCKLING OF PURLINS SUPPORTING STANDING SEAM ROOF WITH ONE SAG-ROD

Determination of Buckling Mode for Braced Elastic–plastic Frames

Determination of buckling mode for elastic-plastic braced frames

Vibration and buckling of a double-beam system under compressive axial loading

Refined study on lateral-force resistance of dual structural system composed of moment-resisting frame and chevron braces

Elastic Flexural-Torsional Buckling of Doubly Symmetric Web-Tapered I-Beams

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES