Basic Properties Of A Kf Modified Alpo4-5 Molecular Sieve

Jian Hua Zhu,Ying Wang,Qin Hua Xu,Hideshi Hattori

DOI: https://doi.org/10.1039/cc9960001889

IF: 4.9

1996-01-01

Chemical Communications

Abstract:Dispersion of KF on AlPO4-5 molecular sieve creates strong basic sites and basic catalytic activity for the isomerization of butenes at 273 K.

What problem does this paper attempt to address?

New Solid Base Derived From Alpo4-5 Supported Kf

Jh Zhu,Qh Xu,H Hattori

IF: 9.1

1996-01-01

Chinese Chemical Letters

Abstract:Dispersion of KF on AlPO4-5 molecular sieve created basic sites and caused 1654 cm(-1) band of bidentate carbonate in CO2 adsorption. After pre-treated above 823K, 5%KF/AlPO4-5 exhibited basic catalytic activity in the isomerization of butenes at 273K, and the activity increased with the pre-treatment temperature up to 923K.
Investigation on the solid strong bases derived from supported KF

Jianhua Zhu,Qinhua Xu

1997-01-01

Acta Chimica Sinica

Abstract:In the present study, the reason for the high basicity of KF/Al2O3 and the nature of the basic active sites on KF/Al2O3 were explored. KF modification has also been applied to other metal oxides and molecular sieves. Hydration could produce some partially hydrated fluoride species and promote CO2 adsorption on KF and KF/CaF2, but the basicity of these species was too weak to catalyze 1-butene isomerization at 273K. The effect of pretreatment temperature on the basicity of KF/Al2O3 was examined. Based on the results of Temperature Programmed Decomposition (TPDE), FTIR and probe reaction, the [Al-OH?F-] species were recognized to be the main active species on KF/Al2O3 in 1-butene isomerization at 273K. Dehydroxylation at high temperature could destroy or suppress these species and caused deactivation on KF/Al2O3. KF was firstly reported to be supported on AlPO4-5 molecular sieve. Through the interaction with the support, KF modification can create strong basic sites on AlPO4-5 and catalyse the butene isomerization at 273K.
Attempts to create new shape-selective solid strong base catalysts

Jianhua Zhu,Yuan Chun,Ying Wang,Qinhua Xu

DOI: https://doi.org/10.1016/S0920-5861(99)00012-7

IF: 5.3

1999-01-01

Catalysis Today

Abstract:Loading of KF on zeolite NaY leads to a similar basicity to that of KOH/NaY, but no strongly basic sites formed on the composite due to the negative effect of SiO4 tetrahedra in NaY which form species with low base strength. Using ALPO(4)-5 or NaY coated with Al2O3 to support KF could avoid the effect of SiO4 tetrahedra and increased the base strength of the sample. KNO3 loaded on NaY created basic sites after decomposition at 673 K with a redox method, and KNO3/KL was found to have superbasicity. For preparation of strongly basic zeolites, microwave irradiation was employed to disperse MgO on zeolites, and the resulting materials showed high activities in the decomposition of isopropanol or the isomerization of cis-but-2-ene at 273 K. (C) 1999 Elsevier Science B.V. All rights reserved.
Synthesis of the Molecular-Sieve Alpo4-5 with an Unequal Molar Ratio of Al2o3 to P2o5

JX DONG,JQ LI,GH LIU,F WU,JK CHANG,WY XU

DOI: https://doi.org/10.1039/c39920000277

1992-01-01

Abstract:The aluminophosphate molecular sieve AlPO4-5 in which the molar ratio of Al2O3 to P2O5 is in the range from 1.43:1 to 2.21:1 has been synthesized and characterized by X-ray powder diffraction and P-31 and Al-27 solid-state magic angle spinning NMR spectroscopy.
An investigation of KF modification to generate strong basic sites on NaY zeolite

Jian Hua Zhu,Yuan Chun,Yu Qin,Qin-Hua Xu

DOI: https://doi.org/10.1016/S1387-1811(98)00139-5

IF: 5.876

1998-01-01

Microporous and Mesoporous Materials

Abstract:Through an interaction with zeolite NaY to liberate KOH, KF modification provoked a basicity similar to that of KOH/NaY, and the resulting catalyst exhibited the same basic catalytic properties as KOH/NaY in the decomposition of isopropanol (IPA). Owing to the competitive reaction of the silicon component in NaY with the KOH liberated to form species with a low base strength, however, KF modification did not generate strong basic sites on NaY. Coating alumina onto NaY by hydrolysis of aluminum isopropoxide produced a new porous material without any significant change in the pore size of the NaY zeolite, and after modification with KF this new solid base exhibited a higher base strength (H−=17.2) than the parent NaY zeolite (H−=9.3).
Exploration On The Basic Active Centres Of Kf/Al2o3: Effect Of Pretreatment Temperature

Jh Zhu,H Tsuji,H Kabashima,H Hattori,H Kita

IF: 9.1

1995-01-01

Chinese Chemical Letters

Abstract:KF/Al2O3 reached maximum activity at the pretreatment temperature(T-p) of 623K or 723K in 1-butene isomerization at 273K, according to the amount of KF loaded. Further increment of T-p lowered the activity of KF/Al2O3 due to the suppression of [Al-OH-F] strong basic sites through de-hydroxylation. Changes in the state and function of F- caused the deactivation of KF/Al2O3, at high T-p.
Basic properties of new solid strong bases derived from Al 2O 3 supported KNO 3

Jianhua Zhu,Ying Wang,Yuan Chun

IF: 16.5

1997-01-01

Chinese Journal of Catalysis

Abstract:Dispersion and decomposition of KNO 3 loaded on A1 2O 3 were examined by means of XRD and XPS. The basicity of KNO 3/Al 2O 3 was evaluated by using CO 2-TPD and titration methods. All of the KNO 3 loaded on Al 2O 3 can be well dispersed and has a basic strength (H -) of 18.4 when the loading of KNO 3 is below the monolayer dispersion threshold. However, when the loading of KNO 3 is above the threshold, only about 7% of KNO 3 can be dispersed through the interaction with Al 2O 3 support and decomposed in a mild pretreatment such as evacuation at room temperature, while a lot of the undispersed KNO 3 located in the pores of Al 2O 3 forms a new phase such as K 2[Al(NO 3)]5. Both the residual KNO 3 and K 2[Al(NO 3)] 5 decompose during evacuation at 873 K, and potassium ions migrate from the inner to the external surface of Al 2O 3 during the evacuation process. Consequently, several layers of basic materials such as K 2O overlap on the Al 2O 3, and result in some superbasic sites with a basic strength (H -) of 27.0. These superbasic basic sites exhibit high catalytic activity in the cis-butene-2 isomerization at 273 K, and catalyze cistrans isomerization besides double bond isomerization of cis-butene-2 at 273 K.
Investigation on basicity of K2CO3/Al2O3 and KNO3/Al2O3 with probe butene isomerization reaction combined with IR and CO2-STD methods

Jianhua Zhu,Ying Wang,Yamaguchi Tsutomu

1996-01-01

Abstract:Basic properties of potassium salts-derived catalysts were prepared and assessed by isomerization of butene combined with IR and CO2-STD methods. The influence of K content, temperature of calcination and evacuation, the nature of supports and the anions in potassium salts on the basicity of potassium salt-derived solid bases were examined. By proper activation, alumina-supported KNO3 and K2CO3 exhibited high basicity, in spite of the unsupported KNO3 and K2CO3 which showed almost no basicity. Based on the results of CO2 poisoning, these strong basic sites which adsorbed CO2 above 523K, especially above 673K, were recognized to be the main active centres for cis-2-butene isomerization at 273K. Calcination combined with evacuation at 773K can produce very strong basicity on 26w% KNO3/ Al2O3. Formed in the in situ activation prior to reaction, the uncontaminated active centres on KNO3/Al2O3 kept high efficiency in the isomerization of trans-2-butene.
Promotion Effect Of Kf On The Basic Properties Of Zro2

Jh Zhu,H Kabashima,H Hattori,H Kita

IF: 9.1

1995-01-01

Chinese Chemical Letters

Abstract:Basicity of ZrO2 is enhanced by KF modification due to the reaction of KF with ZrO2 surface: KF + ZrO2 --> K2ZrF6 + KOH. After pretreated above 673K, KF/ZrO2 catalyst exhibited higher activity for 1-butene isomerization at 273K than ZrO2. The amount of basic sites strongly adsorbing CO2 in the form of bicarbonate was also increased.
Influence of cations (Li+, Na+, K+)for synthesis mesoporous molecular sieve MCM-41 and their properties

Jinxiang Dong,Ping Dong,Guanghuan Liu,Jinan Sun

1997-01-01

Abstract:The conditions for hydrothermal synthesis of mesoporous molecular sieve MCM-41 have been studied in gel M2O (M=Li, Na, K)-Al2O3-SiO2-CTMAB-H2O system. Experiments indicated that KOH showed better performance to replace NaOH as an inorganic alkali to synthesize molecular sieve MCM-41. As synthesized samples were characterized by XRD, SEM, TG and N2 adsorption isothermals.
Synthesis and characterization of mesoporous aluminosilicate molecular sieve from K-feldspar

Shiding Miao,Zhimin Liu,Hongwen Ma,Buxing Han,Jimin Du,Zhenyu Sun,Zhenjiang Miao

DOI: https://doi.org/10.1016/j.micromeso.2005.05.006

IF: 5.876

2005-01-01

Microporous and Mesoporous Materials

Abstract:Mesoporous aluminosilicate molecular sieves have been synthesized using K-feldspar, a natural ore rich in silicon and aluminum sources, as starting material. In this method, the mixture of K-feldspar and K2CO3 with mass ratio of 2:3 was first calcined at 880°C for 1.2h. The calcined materials were then dissolved in water together with cetyltrimethylammonium bromide as structure-directing agent, resulting in mesoporous molecular sieves after heating the solution at 130°C for 60h. Scanning electron microscopy and transmission electron microscopy observations indicated that the resulting materials were spherical particles with size of about 100nm. The mesoporous structure of the as-synthesized materials was confirmed by low angle X-ray diffraction and nitrogen sorption analysis. The BET surface area of the as-prepared material after calcined at 550°C was 507m2g−1 and the pore volume was 0.854cm3g−1. 27Al MAS NMR analysis showed that nearly all of aluminium is incorporated into the framework of the mesoporous material with 4-coordinated state. The acidity of the product was analyzed by FTIR spectroscopy of pyridine-adsorbed product. The product was treated in water at 100°C for 360h, and its mesoporous structure was still intact, suggesting its high hydrothermal stability.
Basic Function Of Partially Hydrated Fluoride Species On Supported Kf

Jh Zhu,H Kabashima,H Hattori,H Kita

IF: 9.1

1995-01-01

Chinese Chemical Letters

Abstract:Preadsorption of H2O promotes CO2 adsorption on KF or KF/CaF2, and provokes appearance of bicarbonates on KF/Al2O3. The existence of partially hydrated fluoride species was confirmed, but they were not the main active sites for 1-butene isomerization. Oxygen element is proved to be necessary in carrier to create strong basic sites through the interaction between dispersed KF and support.
New Unusually Strong Solid Basic Material Derived from KL Zeolite Impregnated with KNO3

JH Zhu,Y Chun,Y Wang,QH Xu

DOI: https://doi.org/10.1016/s0167-577x(97)00094-3

IF: 3

1997-01-01

Materials Letters

Abstract:Dispersion and decomposition of KNO3 on KL zeolite can create strong basic sites upon calcination at 600 °C, and their basic strength can reach H− = 27.0 which is the characteristic of a solid superbase. The resulting catalyst showed a high catalytic activity for the isomerization of cis-but-2-ene at 0 °C.
Synthesis and Characterization of A Novel Crystalline Alpo4 Molecular-Sieve, Cfap-7

Yingcai Long,Weihong Zhang,Heyong He

DOI: https://doi.org/10.1007/bf00665369

1987-01-01

Journal of Inclusion Phenomena

Abstract:The novel crystalline aluminophosphate CFAP-7, having a characteristic X-ray powder diffraction pattern, has been synthesized hydrothermally in a system consisting of di-n-butylamine-(NH4)2O−P2O5−Al2O3−H2O at 120 to 140°C, the P2O5 and Al2O3 sources of which were provided by (NH4)3PO4·3H2O and Al2(SO4)3 in aqueous solution, respectively. Investigations by DTA, TG, DTG, XRD, and IR indicate transformation of the original product (form A) into more stable crystal forms B and C on heating at about 180°C and 240°C, respectively, while liberating water and amine. Isotherms for the adsorption of water and methanol at 23°C show that both form B and form C are molecular sieves with a window dimension of 4.3–4.9 Å, and a methanol volume adsorbtion greater than that of water.
Studies on preparing molecular sieves AIPO4-5 and AIPO4-11 by the vapour phase method

Jinping Li,Guanghuan Liu,Jinhui Cao,Xinyu Chui,Jinxiang Dong

1997-01-01

Abstract:It was reported that gel HF Al2O3 P2O-H2O transformed into molecular sieves AlPO4-5 and AlPO4-11 in vapour phase of amines-H2O mixtures. In this paper, the influences of different types of acids and amines, the F-/Al2O3 ratios and the H2O/amine ratios for preparing pure phase molecular sieves AlPO4-5 and AlPO4-11 have been studied. The experiments have demonstrated that coordination of F anion to Al is one of the key factors for preparing molecular sieves AlPO4-5 and AIPO4-11 By means of the vapour phase method, molecular sieves AlPO4-5 and AlPO4-11 can be prepared either in the vapour system of Et3N-H2O or in the vapour system of n-Pr2NH-H2O, only if the HF in the system is in a suitable amount. Synthesized samples were characterized by XRD, SEM and FT-IR. The data show that the synthesized samples have typical physical chemical properties of molecular sieve AlPO4-n.
Synthesis And Characterization Of Potassium-Modified Alumina Superbases

Ying Wang,Jian Hua Zhu,Wen Yu Huang

DOI: https://doi.org/10.1039/b100084p

IF: 3.3

2001-01-01

Physical Chemistry Chemical Physics

Abstract:Novel solid superbases can be prepared by dispersing potassium salts such as K2CO3 and KHCO3 on alumina followed by thermal treatments. The resulting materials show an extremely high activity in the isomerization of cis-but-2-ene at 0 degreesC and possess base strength of at least H- = + 26.5. X-Ray diffraction (XRD) and Raman spectra of K2CO3 or KHCO3 modified alumina reveal the formation of potassium hydroalumina carbonate, which is the precursor of active species. Decomposition of potassium salts on alumina has been studied by use of thermal gravimetric differential thermal analysis (TG-DTA) and temperature programmed decomposition-mass spectrometry (TPDE-MS). Two CO2 evolution processes were observed in the TPDE -MS profile, corresponding to the decomposition of potassium hydroalumina carbonate and bulk potassium salt.
Mgo/Kl: Strong Basic Zeolite Prepared by Microwave Radiation

JH Zhu,Y Wang,Y Chun,Z Xing,QH Xu

DOI: https://doi.org/10.1016/s0167-577x(97)00249-8

IF: 3

1998-01-01

Materials Letters

Abstract:MgO can be directly dispersed on KL zeolite by microwave radiation and forms strong basic sites with strength of H−=18.4. The resulting strong basic zeolite exhibits a high activity in cis-2-butene isomerization at 0°C.
The State of Iron Sites in the Calcined FeAlPO4-5 and Its Tuning to the Property of Microporous AlPO4-5 Molecular Sieve

Bing Feng,Jiangcheng Li,Xiaochun Zhu,Qiaoxia Guo,Wencheng Zhang,Guangming Wen,Zhihua Zhang,Lin Gu,Zhenzhong Yang,Qinghua Zhang,Baojian Shen

DOI: https://doi.org/10.1016/j.cattod.2015.06.022

IF: 5.3

2015-01-01

Catalysis Today

Abstract:The dispersion and coordination is critical to the nature of metal phases. This article describes an approach of single Fe sites preparing under microporous environment via calcination of the Fe incorporated FeAlPO4-5 as well as the tuning to the property of AlPO4-5 molecular sieve. The UV, Raman, EPR spectroscopies and H-2-TPR characterization revealed through the extraction of framework Fe inside the micropore by calcination, extra -framework Fe sites were generated, the dispersion of which was higher than Fe sites of impregnated Fe2O3/AlPO4-5, and it indicated that part of Fe sites of FeAlPO4-5 can be with coordination vacancy. It is notable that the presence of single Fe sites was directly observed by Cs-corrected STEM micrograph. NH3-TPD and toluene-TPD results both exhibited an enhanced acidity and pi bond adsorption ability of FeAlPO4-5 toward AlPO4-5 and the impregnated sample Fe2O3/AlPO4-5. Finally, the FeAlPO4-5 turned out to perform higher thiophene desulfurization rate against AlPO4-5 and impregnated sample, which can be related to the improvement in the adsorption ability and reactivity for the single Fe sites inside the microporous environment. (C) 2015 Elsevier B.V. All rights reserved.
Basicity and Crystal Phase of Mesoporous K2O-MgO/ZrO2-La2O3 Catalyst

Yu Su,Guo Jun Dong,Cheng Yuan Wang,Jin Sheng Gao,Dong Sheng Ma,Zhi Zhong Sun,Peng Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.924.269

2014-01-01

Advanced Materials Research

Abstract:A new solid base, mesoporous K2O-MgO/ZrO2-La2O3, was prepared by hydrothermal and immersion process using a cationic surfactant C16H33(CH3)3NBr (CTAB) as template．The samples were characterized by N2 adsorption-desorption, X-ray diffraction(XRD), Raman spectroscope and CO2 temperature programmed desorption(CO2-TPD). XRD and Raman spectra indicated that the catalyst calcined at 600°C and 700 °C remained surface and bulk tetragonal phase and good mesoporous characteristics when the content of K2O is less than 0.5. While the monoclinic phase is appeared on catalyst surface when the content of K2O is more than 0.5 calcined at 700 °C. CO2-TPD proves that there are two adsorption states at high temperature corresponding to super alkaline sites of K2O and undecomposed KNO3. The catalyst with 0.4 mol ratio of K2O to ZrO2 calcined at 700 °C showed higher activity in the synthesis of di-2-ethylhexyl carbonate (DEHC) from dimethyl carbonate (DMC) and 2-ethylhexanol (EHOH).
Synthesis of Aluminophosphate Molecular Sieves in Alkaline Media

Na Sheng,Ye Ma,Qianwen Zhu,Xin Hong,Juan Zhang,Jun Xu,Feng Deng,Junliang Sun,Zhaochi Feng,Liang Wang,Xiangju Meng,Feng-Shou Xiao

DOI: https://doi.org/10.1002/chem.202001050

2020-01-01

Chemistry

Abstract:Unlike conventional aluminosilicate zeolites synthesized in alkaline media, aluminophosphate molecular sieves (AlPOs) have always been prepared under acidic conditions in the past three decades; this has been regarded as one of essential factors for synthesis, except for the case of silica-substituted analogues (SAPOs). For the first time, we demonstrate herein a simple and generalized route for synthesizing various types of aluminophosphate molecular sieves in alkaline media. A series of aluminophosphate sieves and their analogues have been prepared with different quaternary ammonium cations as structure-directing agents in this manner. The above successes have extended the systematic media from acidic or neutral to alkaline for the preparation of a series of aluminophosphate molecular sieves, which possibly open an alternative route for the synthesis of aluminophosphate molecular sieves.

Basic Properties Of A Kf Modified Alpo4-5 Molecular Sieve

New Solid Base Derived From Alpo4-5 Supported Kf

Investigation on the solid strong bases derived from supported KF

Attempts to create new shape-selective solid strong base catalysts

Synthesis of the Molecular-Sieve Alpo4-5 with an Unequal Molar Ratio of Al2o3 to P2o5

An investigation of KF modification to generate strong basic sites on NaY zeolite

Exploration On The Basic Active Centres Of Kf/Al2o3: Effect Of Pretreatment Temperature

Basic properties of new solid strong bases derived from Al 2O 3 supported KNO 3

Investigation on basicity of K2CO3/Al2O3 and KNO3/Al2O3 with probe butene isomerization reaction combined with IR and CO2-STD methods

Promotion Effect Of Kf On The Basic Properties Of Zro2

Influence of cations (Li+, Na+, K+)for synthesis mesoporous molecular sieve MCM-41 and their properties

Synthesis and characterization of mesoporous aluminosilicate molecular sieve from K-feldspar

Basic Function Of Partially Hydrated Fluoride Species On Supported Kf

New Unusually Strong Solid Basic Material Derived from KL Zeolite Impregnated with KNO3

Synthesis and Characterization of A Novel Crystalline Alpo4 Molecular-Sieve, Cfap-7

Studies on preparing molecular sieves AIPO4-5 and AIPO4-11 by the vapour phase method

Synthesis And Characterization Of Potassium-Modified Alumina Superbases

Mgo/Kl: Strong Basic Zeolite Prepared by Microwave Radiation

The State of Iron Sites in the Calcined FeAlPO4-5 and Its Tuning to the Property of Microporous AlPO4-5 Molecular Sieve

Basicity and Crystal Phase of Mesoporous K<sub>2</sub>O-MgO/ZrO<sub>2</sub>-La<sub>2</sub>O<sub>3</sub> Catalyst

Synthesis of Aluminophosphate Molecular Sieves in Alkaline Media