Abstract:Purpose The theoretical method of converting the magnetic circuit into an electric circuit is mature, but the way to determine the inductances in the electric circuit is not reliable, especially for the core working in saturation status, and it is impossible to determine the inductances by the transformer terminal measurements, as the measurement information is not enough to determine a number of inductances. This paper aims to propose an approach of calculating the reluctances. Design/methodology/approach In this paper, an approach of calculating the reluctances is proposed based on the numerical simulation of magnetic field in transformer with different values of current excitation. The reluctance of a core segment or air region as a branch of magnetic circuit is obtained by the magnetic energy and magnetic flux. By this way, all the reluctances as function of flux can be determined, and then the inductances can be determined. The reluctances and equivalent electric circuit of three-phase integrative transformer is determined, and its validation is proved in the paper. Findings The single phase example shows that the proposed method has a good performances on analysis of the inrush current in deep saturation. The peak value of the inrush current derived from the proposed approach matches well with the results obtained by coupled circuit-FEM analysis, and the difference is about 4.8 per cent. For studies on dual models of single phase transformers, the leakage inductances have important effects on the peak value of the inrush current. The reluctances of three-phase transformer are calculated, and the equivalent circuit simulation results are slightly smaller than the coupled circuit-FEM simulation results. Originality/value Approach of calculating the reluctances based on the numerical simulation of magnetic field in transformer is proposed. The magnetic core and air space are divided into several segments, and the reluctance for each segment is calculated based on the energy in the region and the flux of the cross-sectional area. By applying various excitation currents, all the reluctances as function of flux can be determined, and then all the non-linear inductances including the non-linear leakage inductances are obtained. The proposed approach is reliable to determine a number of inductances in the dual electric circuit, especially for deep saturation status.

Analysis of the Leakage Inductance Parameter Characteristics Using the Transformer T-equivalent Circuit

Calculation of Leakage Inductance of Two-Winding Transformer and Its Application to Impedance Voltage Design

A novel method to determine leakage inductance for internal fault analysis in power transformer

Applicability analysis for traditional T-equivalent leakage inductance of three-winding transformer during energization

Module Integral Method for the Calculation of Frequency-Dependent Leakage Inductance of High-Frequency Transformers

General Analytical Model and Optimization for Leakage Inductances of Medium-Frequency Transformers

New Equivalent Circuit of Three-Phase Three-Limb Transformer Based on Magnetic Circuit Characteristics

On-Line Identification Algorithm for Transformer Leakage Inductance

An Accurate Calculation Method of Leakage Inductance of High-Frequency Transformer With Litz Wire Winding Considering Irregular Region

LLC Resonant Transformer Distributed Parameters Abstraction

Iron Core Nonlinearities of Power Transformer

AN INDUCTANCE CALCULATION MODEL OF POWER TRANSFORMER FOR INTERNAL FAULT ANALYSIS

Calculation of Magnetic Flux Leakage and Loss of 220kv Transformer Based on MAGNET Field-Circuit Coupling

FE-based equivalent circuits for simulating transformer internal faults

Temperature Field Simulation Research on the Leakage Inductance Transformer

Leakage Inductance of Power Transformer in High Frequency Switch Mode Power Supply

Calculation Approach of Reluctance in the Magnetic Circuit of Transformer Employed to Convert into Equivalent Electric Circuit

Leakage inductance variation based monitoring of transformer winding deformation

Determination of equivalent parameters of the transformer winding for transient analysis

Study on Finite Element Method Applied in Winding Deformation Monitoring for Calculating the Leakage Inductance of Power Transformer

A Homogenized FEM Data-Driven Model for Calculating Leakage Inductance of High-Frequency Transformer with Litz-Wire Winding