Abstract:Being aware of the great hazard of transformer winding deformation and insulation damage under the impact of huge electromagnetic forces caused by short circuit faults, this paper presented an analysis method based on explicit dynamic 3-D finite element method, enabling detailed and representative investigations of the mechanical effects of external short circuit faults in power transformers. Considering the displacements and deformations of windings could change the leakage flux distribution and further influence the remaining computation, an electromagnetic-mechanical field coupling model was proposed. To accurately calculate the windings transient deformation, both the disks and spacers were considered as the elastic-plastic body. Meanwhile, the high-voltage and low-voltage windings were modeled into 21 disks and 18 spacers are evenly arranged between the adjacent copper disks. For illustrating the effectiveness of the proposed method, a real full-scale 120 MVA/220 kV oil-immersed transformer model was built to suffer the serious three-phase short circuit fault as the case study. A comparison of the von-Mises stress distribution in healthy, pre-strain and dislocation windings under the same short circuit fault confirmed that the healthy winding can withstand the impact of short circuit fault without any unrecoverable deformation; insufficient mechanical strength, pre-strain and local dislocation are the key factors to winding deformation, rupture even collapse. Additionally, the theoretical model and simulation method can be used as a substitute for costly and cumbersome field tests in faults characteristics analysis of transformer windings.

Study on Finite Element Method Applied in Winding Deformation Monitoring for Calculating the Leakage Inductance of Power Transformer

Leakage inductance variation based monitoring of transformer winding deformation

Research On Monitoring Of Winding Deformation Of Power Transformer By On-Line Parameter Estimation About Leakage Inductance

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Simulative research on frequency response to winding deformation of power transformer based on finite element method

On-line Detecting of Transformer Winding Deformation Based on Parameter Identification of Leakage Inductance

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

Finite-Element Modeling for Analysis of Radial Deformations Within Transformer Windings

An On-Line Monitoring Method for Winding Deformation of Power Transformers

Research on Integration of Transformer Protection and On-line Detecting Winding Deformation Based on Equivalent Circuit Equation

Computation and Analysis of Power Transformer Winding Damage Due to Short Circuit Fault Based on 3-D Finite Element Method

The Application of Fra-Scr in the Diagnosis of Transformer Coil Deformation

Transformer Winding On-Line Monitoring and Diagnosis Using Current Source Method

Research on integration of transformer protection and winding deformation detecting

Analysis on the Flux Leakage Distribution by the 3D FEM Simulation Method under the Different Local and Minor Transformer Winding Defects

Winding Fault Diagnosis of Power Transformer Based on Finite Element Analysis

Simulation of Transformer Short-circuit Reactance with FEM by Coupling Magnetic Field with Electric Circuit

Improved Online Monitoring Method for Transformer Winding Deformations Based on the Lissajous Graphical Analysis of Voltage and Current

Detection of minor axial winding movement within power transformers using finite element modeling

Deformation Simulation and Analysis of Power Transformer Windings

Online Monitoring Of Winding Deformation And Error Analysis Based On Transformer Impedence Circle Character