Abstract:The experimental results proved that a liquid and commercial chelating agent (DTCR) with dithiocarbamate (DTC) groups could be used to further remove toxic metal ions from the simulated metallic mine wastewater with trace amount of mixed metal ions. Under the optimized operating conditions, just a little dosage of DTCR (the volume ratio of DTCR to wastewater about 1: 104) could make the removal rate of Cr3+, Cu2+, Pb2+, Zn2+ and Cd2+ in the treated water reach 99.70%, 99.28%, 99.10%, 92.33% and 91.49%, respectively. The residual content of the five ions were 0.003, 0.036, 0.009, 0.383 and 0.085 mg/L, which were all obviously lower than the contents required in the emission standard except of Zn2+ and Cd2+. The removal ability followed the order of Cr3+> Cu2+> Pb2+> Zn2+> Cd2+. The characterization revealed that the major functional groups in DTCR were DTC groups (-NCS2) and amino groups (-NH-, -NH2 or -NR2) which were not on DTC groups. The removal mechanisms of these functional groups were investigated by the combination of experimental methods and density functional theory (DFT) calculation, which demonstrated that all the five metal ions could be captured by the metal-ligand bonds between ions and C=S/C-S on DTC groups. But Cr3+, Cu2+ and Pb2+ could be further captured by the electron donation of N atom on -NH2 and -NH- which were not on DTC groups. Moreover, Cr3+ could be further adsorbed by the secondary N atom on DTC group. The relation between the functional groups and metal ions could be calculated quantitatively based on the removal mechanisms. It could well explain the removal ability of DTCR for different metal ions and provide a scientific guideline for the further modification of chelating agent with DTC groups to improve its removal efficiency for Zn2+ and Cd2+ in the depth treatment of wastewater with trace amount of mixed toxic metal ions.

SELECTIVE AND COMPETITIVE REMOVAL OF HEAVY METAL IONS UTILIZING A DITHIOCARBAMATE MODIFIED STARCH

Research on chelating properties of modified corn starch for heavy metals

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Synthesis of Modified Starch and Its Chelating Effects on Heavy Metals

An Insight into Properties and Mechanisms of a Dithiocarbamate Chelating Agent for the Removal of Toxic Metal Ions from Metallic Mine Wastewater

Adsorption Performances and Mechanisms of the Newly Synthesized N,N '-Di (carboxymethyl) Dithiocarbamate Chelating Resin Toward Divalent Heavy Metal Ions from Aqueous Media

Investigation of Heavy Metal Ions Adsorption Ability by Thiol-Modified Corn Stalk Powder

Dithiocarbamate-modified starch derivatives with high heavy metal adsorption performance

Simple Preparation of Aminothiourea-Modified Chitosan As Corrosion Inhibitor and Heavy Metal Ion Adsorbent.

Heavy metal ions removal from aqueous solution by xanthate-modified cross-linked magnetic chitosan/poly(vinyl alcohol) particles

Immobilization of Heavy Metal Using Dithiocarbamate Agent

Preparaion of modified starch and its adsorption properties for heavy metal ions and dyestuffs

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Removal of Multiple Heavy Metal Ions Using a Macromolecule Chelating Flocculant Xanthated Chitosan.

Application of dialdehyde modified starch to the treatment of wastewater containing heavy metallic ions

Fabrication of Starch-based Carbon and Adsorption Capacity for Heavy Metal Ions

SYNTHESIS OF DITHIOCARBAMATE-MODIFIED CHITOSAN AND ITS PROPERTIES FOR HEAVY METALS ADSORPTION

Kinetics and Molecular Mechanism of Chromate Uptake by Dithiocarbamate Functionalized Starch

Low-concentration electroplating wastewater treatment by heavy metal chelator

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Selective Heavy Metal Removal and Water Purification by Microfluidically-Generated Chitosan Microspheres: Characteristics, Modeling and Application.