An Insight into Properties and Mechanisms of a Dithiocarbamate Chelating Agent for the Removal of Toxic Metal Ions from Metallic Mine Wastewater

Fei Feng,Daishe Wu,Jinbao Wan,Hongwei Sun,Rong Wang

DOI: https://doi.org/10.5004/dwt.2018.22067

IF: 1.1

2018-01-01

Desalination and Water Treatment

Abstract:The experimental results proved that a liquid and commercial chelating agent (DTCR) with dithiocarbamate (DTC) groups could be used to further remove toxic metal ions from the simulated metallic mine wastewater with trace amount of mixed metal ions. Under the optimized operating conditions, just a little dosage of DTCR (the volume ratio of DTCR to wastewater about 1: 104) could make the removal rate of Cr3+, Cu2+, Pb2+, Zn2+ and Cd2+ in the treated water reach 99.70%, 99.28%, 99.10%, 92.33% and 91.49%, respectively. The residual content of the five ions were 0.003, 0.036, 0.009, 0.383 and 0.085 mg/L, which were all obviously lower than the contents required in the emission standard except of Zn2+ and Cd2+. The removal ability followed the order of Cr3+> Cu2+> Pb2+> Zn2+> Cd2+. The characterization revealed that the major functional groups in DTCR were DTC groups (-NCS2) and amino groups (-NH-, -NH2 or -NR2) which were not on DTC groups. The removal mechanisms of these functional groups were investigated by the combination of experimental methods and density functional theory (DFT) calculation, which demonstrated that all the five metal ions could be captured by the metal-ligand bonds between ions and C=S/C-S on DTC groups. But Cr3+, Cu2+ and Pb2+ could be further captured by the electron donation of N atom on -NH2 and -NH- which were not on DTC groups. Moreover, Cr3+ could be further adsorbed by the secondary N atom on DTC group. The relation between the functional groups and metal ions could be calculated quantitatively based on the removal mechanisms. It could well explain the removal ability of DTCR for different metal ions and provide a scientific guideline for the further modification of chelating agent with DTC groups to improve its removal efficiency for Zn2+ and Cd2+ in the depth treatment of wastewater with trace amount of mixed toxic metal ions.