Abstract:Metal-organic complexes, especially those of ethylenediaminetetraacetic acid (EDTA) with metals such as copper (Cu) and nickel (Ni) (denoted here as Cu-EDTA and Ni-EDTA), are common contaminants in wastewaters from chemical and plating industries. In this study, a multi-electrode (ME) system using a two-chamber reactor and two pairs of electrodes is proposed for simultaneous electrochemical oxidation of a wastewater containing both Cu-EDTA and Ni-EDTA complexes as well as separation and selective recovery of Cu and Ni onto two different cathodes via electrodeposition. Our results demonstrate that the ME system successfully achieved 90% EDTA removal, 99% solid Cu recovery at the Cu recovery cathode and 56% Ni recovery (33.3% on the Ni recovery cathode and 22.6% in the solution) after a four-hour operation. The system further achieved 85.5% Ni recovery after consecutive five cycles of operation for 20 h. While Cu removal was mainly driven by the direct reduction of EDTA-complexed Cu(II) at the cathode, oxidation of EDTA within the Ni-EDTA complex at the anode was a prerequisite for Ni removal. The oxidation of metal-bound EDTA and free EDTA was driven by •OH and direct electron transfer on the PbO2 anode surface and graphite anode, respectively. We further show that ME system performs well for all pH conditions, treatment of real wastewaters as well as wastewaters containing other metals ions (Cr and Zn) along with Cu/Ni. The separation efficiency of Cu and Ni is dependent on applied electrode potential as well as nature and concentration of binding ligand present with comparatively lower separation efficiency achieved in the presence of weaker binding capacity and/or at lower ligand concentration and lower applied electrode potential. As such, some optimization of electrode potential is required depending on the nature/concentration of ligands in the wastewaters. Overall, this study provides new insights into the design and operation of EAOP technology for effective organic abatement and metal recovery from wastewaters containing mixtures of various metal-organic complexes.

Low-concentration electroplating wastewater treatment by heavy metal chelator

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

An Insight into Properties and Mechanisms of a Dithiocarbamate Chelating Agent for the Removal of Toxic Metal Ions from Metallic Mine Wastewater

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

Electrochemical Removal of Metal-Organic Complexes in Metal Plating Wastewater: A Comparative Study of Cu-EDTA and Ni-EDTA Removal Mechanisms.

Investigation of plating wastewater treatment technology for chromium, nickel and copper

Electrokinetic removal and recycling of heavy metals from sewage sludge with citric acid complexation

Study on the Application of Heavy Metal Chelating Agent in Wastewater Treatment

Treatment of electroplating wastewater using electrocoagulation and integrated membrane

Methods for Treating Strong Chelate-Containing Wastewater PartⅡ——Chelation/precipitation Process for the Treatment of Mixed Electroplating Wastewater

Enhanced removal of heavy metals from electroplating wastewater through electrocoagulation using carboxymethyl chitosan as corrosion inhibitor for steel anode

Research on heavy metal removal from wastewater by DTC with different structure

An Electrochemical Strategy for Simultaneous Heavy Metal Complexes Wastewater Treatment and Resource Recovery.

Simultaneous Cu(II)-EDTA decomplexation and Cu(II) recovery using integrated contact-electro-catalysis and capacitive deionization from electroplating wastewater

Electrochemical treatment of wastewaters containing metal-organic complexes: A one-step approach for efficient metal complex decomposition and selective metal recovery

Combined Process of High-voltage Pulse Electrocoagulation and Refined Diatomite for Treatment of Electroplating Wastewater

Synthesis and Characterization of a Novel Magnetic Cation Exchange Resin and Its Application for Efficient Removal of Cu2+ and Ni2+ from Aqueous Solutions

EDTA-enhanced Electrokinetic Remediation of Aged Electroplating Contaminated Soil Assisted by Combining Dual Cation-Exchange Membranes and Circulation Methods

Enhanced removal of copper ions from wastewater using small spherical Fe-N-C material via selective electro-sorption: Experiment and calculation