Abstract:EDTA has been widely utilized as a chelating agent in soil heavy metal remediation, due to its strong coordination capability. Electrochemical deposition is a promising avenue to treat soil washing effluent. However, the impact of advanced electrochemical techniques on EDTA remains incompletely understood. Herein, we present a pioneering approach, utilizing a dual-chamber electrolytic cell and alternating current (AC) power supply. This approach achieves concurrent removal of M-EDTA while efficiently recovering heavy metal and recycling EDTA. Results demonstrate AC displays superior heavy metal removal capability for Cu, Pb, and Cd compare to direct current (DC), with EDTA decomposition mainly occurring in the anolyte. Substituting DC with AC and employing the dual-chamber electrolytic cell significantly enhances EDTA recovery efficiency from 47% to an impressive 96.8%. XPS and Raman spectra reveal an enhanced oxidative surface of the graphite anode under AC, which diminishes the decomposition of EDTA. Long-term experiments validate that this strategy boosts EDTA cyclability to 20 cycles with an outstanding 84% recovery efficiency and negligible electrode corrosion, surpassing the 8 cycles under the traditional strategy. This study innovatively combines cell design and electrochemical techniques, remarkably improving the reusability of EDTA and anode, offering valuable insights for chelate-related applications. Statement of Environmental Implication The global escalation of anthropogenic activities has triggered severe heavy metal pollution, posing significant threats to human health. The utilization of chelate such as ethylenediaminetetraacetic acid (EDTA) for soil remediation, coupled with the electrochemical treatment of effluent, not only facilitates the comprehensive removal of heavy metals from the soil but also enables metal recovery through electro-deposition methods. However, the economic recovery of EDTA during the wastewater treatment process, while simultaneously ensuring the effective removal of heavy metal pollutants, remains a challenging task. Alternating Current (AC) emerges as a promising electrochemical-assisted technology, particularly in the electrodeposition of heavy metals. Recent study by Chen et al. reported that AC induces enhanced dehydration and faster electron transport near the electrode, leading to higher M(II) removal and faster kinetics. The application of AC can address the challenge of coulomb repulsion in soil washing effluent. However, existing electrochemical systems using AC for M-EDTA primarily focus on heavy metal recovery, neglecting EDTA recovery efficiency and counter electrode duration, especially in comparison with Direct Current (DC).

EDTA-enhanced Electrokinetic Remediation of Aged Electroplating Contaminated Soil Assisted by Combining Dual Cation-Exchange Membranes and Circulation Methods

Migration and Decomplexation of Metal-Chelate Complexes Causing Metal Accumulation Phenomenon after Chelate-Enhanced Electrokinetic Remediation.

Using Electrode Electrolytes to Enhance Electrokinetic Removal of Heavy Metals from Electroplating Sludge

Effect of EDTA, EDDS, NTA and citric acid on electrokinetic remediation of As, Cd, Cr, Cu, Ni, Pb and Zn contaminated dredged marine sediment

An Increasing Cr Recovery from Soil with Catholyte-Enhanced Electrokinetic Remediation: Effects on Voltage Redistribution Throughout Soil Sections

Insight into the electrochemical process of EDTA-assisted soil washing effluent under alternating current

Enhanced Electrokinetic Remediation of Cadmium-Contaminated Natural Clay Using Organophosphonates in Comparison with EDTA

Enhanced electrokinetic remediation of Cd and Pb spiked soil coupled with cation exchange membrane

Enhanced Electrokinetic Remediation of Lead-Contaminated Soil by Complexing Agents and Approaching Anodes

Process evaluation for optimization of EDTA use and recovery for heavy metal removal from a contaminated soil

Effect of electrolyte, potential gradient and treatment time on remediation of hexavalent chromium contaminated soil by electrokinetic remediation and adsorption

[Enhanced Electrokinetic Remediation of Heavy Metals Contaminated Soils by Stainless Steel Electrodes as well as the Phenomenon and Mechanism of Electrode Corrosion and Crystallization]

Reclamation of EDTA by Sodium Tetraethylenepentamine-Multi Dithiocarbamate after Soil Washing Process with EDTA

A closed-loop process for spent washing solution from multi-metal contaminated soil: EDTA reclamation and recycling

Application of manures to mitigate the harmful effects of electrokinetic remediation of heavy metals on soil microbial properties in polluted soils

Removal Behavior and Mechanisms of Cadmium and Lead by Coupled Ethylenediaminetetraacetic Acid Washing and Electrochemical Reduction: Influence of Current Conditions

Enhanced electrokinetic remediation for Cd-contaminated clay soil by addition of nitric acid, acetic acid, and EDTA: Effects on soil micro-ecology

Optimized Edta Washing Procedure to Decontaminate Heavy Metals from Soils in Iron and Steel Works Sites

Impact of Compounded Chelants on Removal of Heavy Metals and Characteristics of Morphologic Change in Soil from Heavy Metals Contaminated Sites

Remediation of Arsenic-Cationic Metals from Smelter Contaminated Soil by Washings of Na2EDTA and Phosphoric Acid: Removal Efficiencies and Mineral Transformation

Process design and validation of a new mixed eluent for leaching Cd, Cr, Pb, Cu, Ni, and Zn from heavy metal-polluted soil