Abstract:The experimental results proved that a liquid and commercial chelating agent (DTCR) with dithiocarbamate (DTC) groups could be used to further remove toxic metal ions from the simulated metallic mine wastewater with trace amount of mixed metal ions. Under the optimized operating conditions, just a little dosage of DTCR (the volume ratio of DTCR to wastewater about 1: 104) could make the removal rate of Cr3+, Cu2+, Pb2+, Zn2+ and Cd2+ in the treated water reach 99.70%, 99.28%, 99.10%, 92.33% and 91.49%, respectively. The residual content of the five ions were 0.003, 0.036, 0.009, 0.383 and 0.085 mg/L, which were all obviously lower than the contents required in the emission standard except of Zn2+ and Cd2+. The removal ability followed the order of Cr3+> Cu2+> Pb2+> Zn2+> Cd2+. The characterization revealed that the major functional groups in DTCR were DTC groups (-NCS2) and amino groups (-NH-, -NH2 or -NR2) which were not on DTC groups. The removal mechanisms of these functional groups were investigated by the combination of experimental methods and density functional theory (DFT) calculation, which demonstrated that all the five metal ions could be captured by the metal-ligand bonds between ions and C=S/C-S on DTC groups. But Cr3+, Cu2+ and Pb2+ could be further captured by the electron donation of N atom on -NH2 and -NH- which were not on DTC groups. Moreover, Cr3+ could be further adsorbed by the secondary N atom on DTC group. The relation between the functional groups and metal ions could be calculated quantitatively based on the removal mechanisms. It could well explain the removal ability of DTCR for different metal ions and provide a scientific guideline for the further modification of chelating agent with DTC groups to improve its removal efficiency for Zn2+ and Cd2+ in the depth treatment of wastewater with trace amount of mixed toxic metal ions.

SYNTHESIS OF DITHIOCARBAMATE-MODIFIED CHITOSAN AND ITS PROPERTIES FOR HEAVY METALS ADSORPTION

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Adsorption Performances and Mechanisms of the Newly Synthesized N,N '-Di (carboxymethyl) Dithiocarbamate Chelating Resin Toward Divalent Heavy Metal Ions from Aqueous Media

An Insight into Properties and Mechanisms of a Dithiocarbamate Chelating Agent for the Removal of Toxic Metal Ions from Metallic Mine Wastewater

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.

Synthesis of a Novel Dithiocarbamate Surfactant Derivative Adsorbent for Efficient Removal of Heavy Metal Ions

Characteristics of Equilibrium, Kinetics Studies for Adsorption of Hg(II), Cu(II), and Ni(II) Ions by Thiourea-Modified Magnetic Chitosan Microspheres.

Progress in Adsorption for Heavy Metal Ions by Modified Chitosan

Ion-imprinted thermosensitive chitosan derivative for heavy metal remediation

Synthesis of a Novel Silica-Supported Dithiocarbamate Adsorbent and Its Properties for the Removal of Heavy Metal Ions

Research progress in the removal of heavy metals by modified chitosan

Removal of heavy metal ions using chitosan and modified chitosan: A review

Optimization of preparation parameters for environmentally friendly attapulgite functionalized by chitosan and its adsorption properties for Cd2+

Adsorption of Cd~(2+) and Pb~(2+) by Chitosan

Magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent: Preparation, characterization, and application in heavy metal adsorption

α-ketoglutaric acid modified chitosan/polyacrylamide semi-interpenetrating polymer network hydrogel for removal of heavy metal ions

Carboxymethyl Inulin Modified Chitosan Composites for Cu (II) Removal in Aqueous Solution: Synthesis, Influencing Factors and Adsorption Mechanism

Synthesis, Characterization, Kinetics, and Thermodynamics of EDTA-Modified Chitosan-Carboxymethyl Cellulose as Cu(II) Ion Adsorbent

In-situ synthesis of MIL-100(Fe)@chitosan composite beads with hierarchical porous structure for efficient adsorption of chlortetracycline hydrochloride: Synthesis, performance and mechanisms

Research progress of adsorption and removal of heavy metals by chitosan and its derivatives: A review