Abstract:Incorporation of bulk carbon nanotube (CNT) conductors into energy and data systems can require new methods of making a functional interface with low electrical contact resistance and high mechanical strength. Ultrasonic welding has been shown as a viable technique for mechanically and electrically bonding commercial CNT materials (CVD) to copper foil. The mechanical strength across the ultrasonic welds was measured via dynamic mechanical analysis with single lap welds exceeding 350 kPa. The electrical properties of the ultrasonically welded bulk CNT conductors (chemically doped with KAuBr4) to Cu were measured via 4‐point probe and show specific contact resistance between the CNTs and copper as low as 4.3 mΩ cm2. Thus, ultrasonic welding represents a mechanically robust method for making functional contacts between bulk CNTs and metallic interconnects with a low contact resistance. In addition, ultrasonic welding was successfully used to join two CNT ribbons end‐to‐end (breaking strength of single lap welds exceeding 200 kPa) demonstrating that it is also a viable technique for making larger dimension CNT materials from smaller components. Ultrasonic welding is shown as a viable technique for mechanically and electrically bonding bulk CNT materials to copper foil without the need for solder, conductive epoxy, or mechanical crimp connects. Ultrasonic welding is also used to join two CNT ribbons end‐to‐end demonstrating that it is a viable technique for making larger dimension CNT materials from smaller components.

Vacuum Brazing of Carbon Nanotube Bundles

Plumbing carbon nanotubes

Ultrasonic Welding of Bulk Carbon Nanotube Conductors

Vacuum Brazing of C/C Composite and TiAl Intermetallic Alloy Using BNi-2 Brazing Filler Metal

Carbon Nanotube Technology For Solid State And Vacuum Electronics

Interfacial Thermal Conductance of Buckling Carbon Nanotubes

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Fabricating Ultrastrong Carbon Nanotube Fibers via a Microwave Welding Interface

Cover Picture: Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections (adv. Funct. Mater. 11/2005)

High-strength carbon nanotube fibers with near 100% purity acquired via isothermal vacuum annealing

Production Of Large Area Carbon Nanotube Bundles On Metal Substrate

Nanorobotic Spot Welding by Attogram Precision Metal Deposition from Copper-filled Carbon Nanotubes.

Fabrication of the Carbon Nanotubes with Small Pits or Embedded by Nanoparticles Via Template-Assisted Method

Defect-driven room-temperature coalescence of double-walled carbon nanotubes.

Metal-filled Carbon Nanotubes for Nanomechatronics

A high-strength vacuum brazed TC4/316L joint with a Ti–Zr-based amorphous ribbon as the filler metal

Thermal CVD Synthesis of Carbon Nanotubes Filled with Single-Crystalline Cu Nanoneedles at Tips

Carbon nanotube growth for through silicon via application

Conical Carbon Fibers with Carbon Nanotubes As Their Cores: Fabrication, Characterization and Field Emission

Mechanism of Carbon Nanotube Growth in a Nano-agglomerate Fluidized Bed

Brazing of graphite to tungsten using graphene nanoplates reinforced TiNiCu composite filler