Abstract:Crack sizes, geometrical configurations of specimens and structures, as well as loading conditions have significant effect on in-plane and out-of-plane constraint effects. Safety assessment with constraint effects can effectively improve the accuracy. There are prominent discrepancies between compressive fracture and tensile fracture. Most of engineering structures are usually under biaxial loading conditions, so that the influence of biaxial compressive loading on fracture analysis with constraint effects is worth paying attention. The size effect factor (relative crack length a/W, thickness to width ratio t/W and crack inclination angle β) and load factor (lateral pressure coefficient λ) of central cracked plate (CCP) specimens with I-II mixed mode crack on constraint effects under biaxial compressive loading have been investigated through theoretical analysis and finite element analysis. In-plane non-singular T-stress (T 11) and its components (T x, T y, and T xy), out-of-plane non-singular T-stress (T 33), out-of-plane constraint parameter T z and stress triaxiality factor h have been adopted to quantify constraint effects. It demonstrates that λ has remarkable influence on SIF, T 11 and T 33 under biaxial compressive loading. The effect of higher a/W (long cracks) on B 11 is more noticeable when I-II mixed mode crack is closer to pure mode II crack or pure mode I crack. The proportion of shear fracture increases under biaxial compression with λ. With the increase of β, B 33 decreases sharply and then increases rapidly with higher λ. T z can directly reflect stress states and adequately describe the loss of out-of-plane constraint. The stress state of crack tip is more likely to asymptotic plane-strain condition ahead of crack tip under compression. There are crucial differences in variation range and tendency of T z subjected to biaxial tensile and biaxial compressive loading. Moreover, T z is insensitive to λ. Stress triaxiality factor h can illustrate in-plane and out-of-plane constraint effects including size effect and load factor (sensitive to a/W, t/W, β and λ), especially can be adopted as a unified constraint parameter for long cracks under biaxial compressive loading. The in-plane T-stress components can be directly calculated by T 11 under biaxial compression. The empirical equations of K II and T 11 containing size effect and load factor simultaneously are effective and convenient for applications.

The compressive stress effect on fatigue crack growth under tension–compression loading

Effects of Tensile/compressive Overloads on Fatigue Crack Growth Behavior of an Extra-Low-interstitial Titanium Alloy

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Instrumented indentation measurements of residual stresses around a crack tip under single tensile overloads

Finite Element Analysis of the Fatigue Crack Tip Parameters in the Glass Fiber Reinforced Aluminum Alloy Laminates under Tension-Compression Loading

A modified formula for cyclic compression crack growth model considering compressive load effect

Elastic–plastic finite element analysis and experimental study of short and long fatigue crack growth

Experimental study of crack tip deformation under fatigue load

A Simple Engineering Approach in the Prediction of the Effect of Stress Ratio on Fatigue Threshold

Macrostress field of crack in finite body under compression-shear condition and its energy of propagation

Research on the Fatigue Crack Growth Behavior of a Zr/Ti/Steel Composite Plate with a Crack Normal to the Interface

Evaluation Of Excessive Loading Effect On Fatigue Crack Growth Behavior Based On Crack Blunting And Stress Distribution In Front Of The Crack Tip

Near-tip Strain Evolution and Crack Closure of Growing Fatigue Crack under a Single Tensile Overload

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

Characteristics and Effects of T-stresses in Central-Cracked Unstiffened and Stiffened Plates under Mode I Loading

Investigation of Fatigue Mechanics and Crack Evolution Characteristics of Jointed Specimens Under Cyclic Uniaxial Compression

EFFECT OF CYCLIC STRESS-STRAIN BEHAVIOR ON THE PREDICTION OF FATIGUE LIFE FOR CARBON STEEL

Investigation of Fatigue Crack Initiation of Rock–Concrete Interface Using a Stress-Based Fatigue Damage Evolution Law

STUDY OF FATIGUE CRACK GROWTH RETARDATION, CRACK TIP DEFORMATION AND CRACK CLOSURE UNDER SINGLE OVERLOAD APPLICATION FOR A537 STEEL

Investigation on in-plane and out-of-plane constraint effects for plates with I-II mixed mode cracks under biaxial compressive loading

The effect of normal compressive stresses on the fracture behavior of mode II crack under compression and shear loads