Abstract:The state-of-the-art GMAW processes are those with dynamic feeding, branded as cold metal transfer (CMT) by one of the main developers/suppliers. The metal transfer occurs through the combined action of surface tension force and wire electrode pullback, which is synchronized with the electric current waveform. The forward and pullback movement are generated by a highly dynamic secondary feeder. This process is widely applied to join parts and is currently gaining attention in additive manufacturing, due to its high level of controllability over the metallic transfer and bead geometry. However, there is a lack of studies on the manipulation of the CMT waveform and its influence over the welding process, especially regarding the geometrical control of the deposition and its high stability. This research was focused on investigating the effect of current waveform manipulation on the CMT variant of the GMAW process. Experiments were carried out with two customized CMT waveforms. In case 1, a waveform with a current pulse in the short-circuit phase was used and in case 2, a similar waveform was used, with the same average power, but with no current pulse in the short-circuit phase. High-speed videography and electrical signals analysis revealed a greater striction effect of the metal bridge in case 1. In conclusion, the current waveform manipulation with CMT can not only improve stability but also the geometric aspect of the weld bead, while maintaining a similar power and thermal profile, highlighting the geometric characteristics that can be used for building parts via additive manufacturing.

Analysis and Forecase of Dynamic GMAW System on Short Circuit Transfer

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Modeling Heat Transfer During Friction Stir Welding Using a Meshless Particle Method

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Analysis and control of short-circuit experience in short-circuit CO2 welding

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

An investigation of metal transfer process in GMAW

Study on the Molten Pool Fluid Behavior of PAW-Cable-Type Seven-Wire GMAW Hybrid Welding

Numerical simulation of metal transfer in argon gas-shielded GMAW

Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field

Investigation on the Dynamic Behavior of Weld Pool and Weld Microstructure During DP-GMAW for Austenitic Stainless Steel

Analysis of current pulse during short-circuit phase in CMT version of GMAW process under a view of additive manufacturing

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Multi-objective Optimization of Short-Circuit Gas Metal Arc Welding for Overhang Structures by Grey Relational Analysis Integrated Taguchi Method

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

Influence of controlled and conventional short circuit waveforms on mechanical and microstructural effects in the gas metal arc welding processes

Dynamic Metal Transfer Behavior in Double-Wire DP-GMAW of Aluminum Alloy Under Different Pulse Phases

A theoretical study of a gas metal arc welding system

Analysis of Controlled Driving and Spreading Behavior of Molten Pool in Cold Metal Transfer

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Modeling of droplet short-circuiting transfer and simulation of three-dimensional transient behavior of molten pool