Abstract:Abstract On-site inspection with a laser displacement sensor installed on the spindle of a three-axis machine tool has found a wide range of applications in industrial processes. The calibration of the beam direction and the integration of the on-site scanned points are crucial for the measurement of free-form surfaces. This paper presents a method to calibrate the unit direction vector of the laser beam and integrate the on-site scanned points based on a standard ball. By scanning the fixed ball, a group of nonlinear equations is constructed. The nonlinear equations are solved by the Levenberg–Marquardt algorithm to get the unit direction vector of the laser beam and the center position of the standard ball. Then the coordinate transformation parameters between the world coordinate system and the sensor coordinate system are calculated. The scanned points from different coordinate systems are transformed into the world coordinate system by the coordinate transformation. The method simplifies the traditional calibration process and realizes the integration of the multi-angle scanned points on a three-axis machine tool. The feasibility and effectiveness of this method are verified through simulation and practical experiment. By comparing fitting value under different measuring conditions with the nominal, the measurement parameters including the incident angle and the scan depth are optimized. In the experiment, the measurement accuracy of this method reaches 0.02 mm.

The application and calibration of sensors in the laser interferometer for gauge block measurement

Theoretical Analysis Of The Gauge Laser Sensor And Several Design Parameters

Research on the Gauge Sensor Laser Spot

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A New Laser Displacement Sensor Based on Triangulation for Gauge Real-Time Measurement

Research on a Novel Laser Displacement Sensor used for Gauge Measurement

Several measures for reducing the uncertainty of measurement on developing of the laser interferometer for gauge block measurement with double wavelengths

Development of an Automatic Calibration Device for High-Accuracy Low Temperature Thermometers

Calibration of Laser Beam-Direction for Point Laser Sensors

Automatic Laser Interference Measurement of Center Length of Gauge Block

Calibration Method for High-Accuracy Measurement of Long Focal Length with Talbot Interferometry.

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

A High-Frequency Angular Vibration Calibration System Based on Phase Modulated Laser Interferometer Technique

Intelligent Measuring System for Performance Parameters of Laser Range Finder

Calibration technology and application of laser power meter

A calibration approach for installation error of multi-axis laser interferometer

Calibration of the laser displacement sensor and integration of on-site scanned points

Double-laser system for precision measurement of cold atom interferometry

Development and Calibration of a Radial-Shearing Interferometer

Study on the Control of Micro-Environmental Parameters in Long Distance Laser Interferometry

Design of a Data Acquisition System Used in Laser Scanning Diameter Measuring Gauge