Abstract:Using custom made experimental apparatus, the art of electrochemical etching was systematically studied for fabricating micro/nano tungsten probes with controllable tip profiles of exponential, conical, multidiameter, and calabashlike shapes. The characteristic parameters of probe including length, aspect ratio, and tip apex radius could also be well defined. By combining of static and dynamic etching, the conical-shape probe with length up to several millimeters, controllable tip apex radius, and cone angle could be fabricated. In addition, by continuously lifting the tungsten wire up during the electrochemical etching with different speeds and distances, the multidiameter shape probe could be fabricated. Finally by controlling the anodic flow, the multiple “neck-in” could be realized creating a calabashlike probe. The aspect ratio of probes depends on (i) the effective contact time between the surrounding electrolyte and the wire, (ii) the neck-in position of immersed tungsten wire. Under the optimized etching parameters, tungsten probes with a controllable aspect ratio from 20:1 to 450:1, apex radius less than 20 nm, and cone angle smaller than 3° could be achieved. The technique is well suited for the tungsten probe fabrication with a stabilized stylus contour, ultra-sharp apex radius, and high production reproducibility. The art for preparing microprobes will facilitate the application of such microprobes in diverse fields such as dip-pen nanolithography, scanning probe microscopy, micromachining, and biological cellular studies.

Instantaneous Fabrication of Tungsten Microelectrode Based on Single Electrical Discharge

Primary Study on Instantaneous Fabricating Mechanism of Tungsten Microelectrode Based on Single Discharge and Its Application

Fabrication of Cylindrical Tungsten Microelectrode by Electrical Machining

A New Method Of Rapidly Fabricating Micro Probe With Tungsten Wire

Fabricating Microelectrode By Electrochemical Micromachining - Art. No. 06411p

The Art of Electrochemical Etching for Preparing Tungsten Probes with Controllable Tip Profile and Characteristic Parameters

Fabricating Microelectrode With Nano Radius Tip By Electrochemical Micromachining

Experimental Study of Micro-Electrode Array by Micro-Wedm

Micro Tool Electrode Fabrication Using Edge Electrode Discharge Grinding

Microelectrode Array Fabrication by Micro-Wedm

Method of Microelectrode with Electrochemical Machining and Its Applications

Online Measurement by Intersecting-point Electric Contact and Combined Fabrication Process for Micro Tool Electrodes

Study On Molecular Dynamics Simulation Of Tungsten Microelectrode Based On Single Discharge In Edm

Microelectrode fabrication by electrochemical turning

Inductively Coupled Plasma Etching of Bulk Tungsten for MEMS Applications

Micro EDM depositing technology

Experimental Study on the Microelectrodes Fabrication Using Low Speed Wire Electrical Discharge Turning (LS-WEDT) Combined with Multiple Cutting Strategy

Direct And All-Dry Microfabrication Of Ultramicroelectrode Based On Cold Atmospheric Microplasma Jet

Micro EDM deposition in air

Electrochemical micro-machining of high aspect ratio micro-tools with a reverse conical shape tip using electrolyte liquid membrane

An Experimental Study for Evaluating Speed Parameters on Surface Roughness of LS-WEDT and Its Application in Fabricating Microelectrodes