Abstract:This article characterized the mechanical performance and failure mode of single‐lap joints of carbon fiber reinforced boron‐modified phenolic resin plastic (CF/BPR) and TC4 titanium alloy by quasi‐static tensile tests at four temperatures (25, 100, 175, and 250°C). And the validated finite element model was used to analyze the damage propagation of SLJs. This article characterized the mechanical performance and failure mode of single‐lap joints (SLJs) of carbon fiber reinforced boron‐modified phenolic resin plastic (CF/BPR) and TC4 titanium alloy by quasi‐static tensile tests at four temperatures (25, 100, 175, and 250°C). The experimental results indicated that the shear strength of SLJs is 10.8 MPa at 25°C, which experiences monotonic drop to 80%, 42.6%, and 18.5% with temperature increase from 100 to 175°C, and to 250°C, respectively. Additionally, there was a transformation in the failure mode from composite material failure to cohesive failure in the adhesive along with the temperature increase. The intralaminar elasticities of CF/BPR were predicted using representative volume element (RVE), and the mechanical properties of three types of bondlines (i.e., the interlamination, interface of CF/BPR and the epoxy adhesive layer) were determined by both experiment and predictive methods. A finite element model taking into account the intralaminar damage of CF/BPR and the cohesive behavior of three bondlines was established. The simulated results showed good consistency with the experimental data for failure prediction, and the mechanical performance and damage propagation of SLJs at different temperatures were discussed. This research provides reference for the design and manufacture of high‐temperature bonded structures. Highlights RVE and degradation factor methods evaluate the elasticity of composite material. Four types of damage behaviors are considered in the established FE model. The SLJs exhibit single or multiple failure modes at different temperatures. The mechanical properties of SLJs severely degraded with increasing temperature.

Study on Heat-Resistant Property of Adhesive/carbon–carbon Composites Joints

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

A Systematic Study on the Failure Behaviors of Aluminum Alloy/composite Bonded Joints Exposed to Various Typical Aging Environments for Automobiles

IR Analysis of Curing and Decomposability of One Component Middle Temperature Curing Heat-Resistant Adhesive

Study on Humidity Aging Property of Adhesive/Carbon-Carbon Composites Joints

Compression Shear Properties of Adhesively Bonded Single-Lap Joints of C/C Composite Materials at High Temperatures

A user-friendly heat-resistant modified polymer-based adhesive for joining and repair of carbon/carbon composites

Effect of Temperature and Humidity Coupling on the Ageing Failure of Carbon Fiber Composite/Titanium Bonded Joints

Analysis of the influence of damp-heat aging on the shear failure of the adhesive joint of composite materials

Determination of the tensile residual properties of a wound carbon/epoxy composite first exposed to fire

Effect of Heat Treatment under Different Atmospheres on the Bonding Properties and Mechanism of Ceramiziable Heat-Resistant Adhesive

ANALYSIS OF ELEMENTS CONTENT ON ADHESIVE JOINT SURFACE AND INTERFACE WITH ENERGY DISPERSIVE X-RAY SPECTROSCOPY

Heat Resistance of Adhesive Joints of Heterocyclic Aramid Fibers under Static Load

Investigations into the Influence of Temperature on the Tensile Shear Strength of Various Adhesives

The Effect of Thermal Aging on the Failure Behavior of Adhesive- Bonded Single-Lap Joints

Data Analysis on Adhesive Property Testing Methods of Hot-melt Pressure-sensitive Adhesive with Styrene Thermoplastic Elastomer

The Durability of Adhesive/carbon–carbon Composites Joints in Salt Water

Study on Organosilicon Modified Epoxy Resin Adhesive for Heat-resistance

Mechanical performance of adhesively bonded carbon fiber reinforced boron‐modified phenolic resin plastic‐titanium single‐lap joints at high temperature

Influence of Hydrothermal Aging under Two Typical Adhesives on the Failure of BFRP Single Lap Joint

Investigation of the thermal degradation kinetics of ceramifiable silicone rubber-based composite