Abstract:Experimental set‐up showing the mechanical testing of laminated composites under fire conditions. This study explores the effects of critical temperature conditions on carbon fiber‐reinforced Poly Phenylene Sulfide (PPS) laminates, focusing on the coupling between thermal and mechanical behaviors. The thermo‐mechanical behavior of angle‐ply laminates is examined under both homogeneous (thermal decomposition and deformation/damage) and heterogeneous (fire) conditions following three primary objectives: (i) Investigate the impact of temperature distribution on the formation of porosities within the composite, considering their significance in thermal transfer and stress concentration—(ii) Evaluate the changes in residual mechanical behavior and properties under tension due to thermally‐induced damage—(iii) Improve the understanding of the interactions between severe thermal exposures and the mechanical behavior. X‐ray tomographic analyses and tensile tests were conducted to achieve these goals. Porosities resulting from thermal damage are identified as a key factor affecting the structural integrity of C/PPS laminates for high‐temperature applications. Mechanical testing reveals that the porosity content significantly reduces the tensile properties (axial stiffness and strength). Under homogeneous temperature conditions, the decrease in the tensile properties is significant up to Tonset (465°C) from which both the axial strength and stiffness dramatically decrease by −75 and −50%, respectively. As exposed to a kerosene flame during 60 s, corresponding to an aggression of 115 kW/m2 on one face of the laminates, the retention of the residual tensile properties remains good (−12% and −22% in stiffness and strength respectively), despite the dramatic decomposition of the polymer matrix. This can be explained from the stress redistribution from the exposed to the back face, and from the role of thermal insulator played by porosities. Highlights Carbon fibers/PPS laminates were subjected to severe thermal aggressions The formation of thermally‐induced porosities is studied A homogeneous aggression significantly decrease the tensile properties (−75%) Once the PPS matrix is severely decomposed, the load transfer is not possible After a 60 s flame exposure, the retention of tensile properties is good (−20%)

Determination of the tensile residual properties of a wound carbon/epoxy composite first exposed to fire

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Experimental Investigation and Numerical Modelling of the Fire Performance for Epoxy Resin Carbon Fibre Composites of Variable Thicknesses

About the influence of a thermal aggression on the tensile behaviour of hybrid PEEK thermoplastic laminates

About the influence of high temperature or fire testing conditions on the tensile behavior of carbon reinforced poly phenylene sulfide laminates

Investigation of self-heating and damage progression in woven carbon fibre composite materials, following the fibres direction, under static and cyclic loading

Effect of thermal exposure on carbon fiber reinforced composites used in civil infrastructure rehabilitation

Fire Behavior and Post-Fire Residual Tensile Strength Prediction of Carbon Fiber/phthalonitrile Composite Laminates

In situ interlaminar shear behavior of carbon fibers reinforced polymer composites exposed to severe thermal aggressions: PPS versus epoxy laminates

Tensile behavior of angle ply carbon reinforced PPS laminates under severe thermal aggressions: Homogeneous and heterogeneous temperature conditions

Dynamic Mechanical Properties and Thermal Effect of an Epoxy Resin Composite, Encapsulation’s Element of a New Electronic Component

Hygrothermal aging effects on the mechanical behaviors of twill‐woven carbon fiber composite laminates with flame‐retardant epoxy resin

The Effect of Multilevel Carbon Reinforcements on the Fire Performance, Conductivity, and Mechanical Properties of Epoxy Composites

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

Fire Safety Assessment of Epoxy Composites Reinforced by Carbon Fibre and Graphene

Thermal Aging Behavior of Carbon Fiber/Epoxy Composites at High Temperature

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

Damage in Carbon Fiber/epoxy Resin Composites under Explosive Impact

Study of the damage behavior of T800 carbon fiber/epoxy resin composites after low-velocity impact under thermo-oxidative aging

Effect of Thermal Ageing on the Impact and Flexural Damage Behaviour of Carbon Fibre-Reinforced Epoxy Laminates

Multi‐scale damage analysis of filament‐wound carbon fiber‐reinforced epoxy composites for hydrogen storage tanks under high strain rates