Abstract:People wear clothes for warmth, survival and necessity in modern life, but in the modern era, eco-friendliness, shortened production times, design and intelligence also matter. To determine the relationship between data series and verify the proximity of each data series, a gray relational analysis, or GRA, is applied to textiles, where seamless bonding technology enhances the bond between components. In this study, a polyurethane prepolymer, 2-hydroxyethyl acrylate (2-HEA) as an end-capping agent and n-octyl acrylate (ODA) as a photoinitiator were used to synthesize a dual-curing polyurethane hot-melt adhesive. Taguchi quality engineering and a gray relational analysis were used to discuss the influence of different mole ratios of NCO:OH and the effect of the molar ratio of the addition of octyl decyl acrylate on the mechanical strength. The Fourier transform infrared spectroscopy (FTIR) results showed the termination of the prepolymer's polymerization reaction and the C=O peak intensity at 1730 cm−1, indicating efficient bonding to the main chain. Advanced Polymer Chromatography (APC) was used to investigate the high-molecular-weight (20,000–30,000) polyurethane polymer bonded with octyl decyl acrylate to achieve a photothermosetting effect. The thermogravimetric analysis (TGA) results showed that the thermal decomposition temperature of the polyurethane hot-melt adhesive also increased, and they showed the highest pyrolysis temperature (349.89 °C) for the polyhydric alcohols. Furthermore, high peel strength (1.68 kg/cm) and shear strength (34.94 kg/cm2) values were detected with the dual-cure photothermosetting polyurethane hot-melt adhesive. The signal-to-noise ratio was also used to generate the gray relational degree. It was observed that the best parameter ratio of NCO:OH was 4:1 with five moles of monomer. The Taguchi quality engineering method was used to find the parameters of single-quality optimization, and then the gray relation calculation was used to obtain the parameter combination of multi-quality optimization for thermosetting the polyurethane hot-melt adhesive. The study aims to meet the requirements of seamless bonding in textile factories and optimize experimental parameter design by setting target values that can effectively increase production speed and reduce processing time and costs as well.

Data Analysis on Adhesive Property Testing Methods of Hot-melt Pressure-sensitive Adhesive with Styrene Thermoplastic Elastomer

Test Research on Water Resistant Performance of Hot Melt Adhesive in Plastic Pipe Reinforced by Cross-winding Steel Wires

Study on Preparation and Property of Hot Melt Pressure Sensitive Adhesive Used for Labels

Weibull Statistical Analysis on Tensile Strength of Adhesive Joint in PMMA

Hot-melt pressure-sensitive adhesive for seamless bonding of nylon fabric Part II: Process parameter optimization for seamless bonding of nylon fabric

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Feasibility of Processing Hot-Melt Pressure-Sensitive Adhesive (HMPSA) with Solvent in the Lab

Hot-melt pressure-sensitive adhesive for seamless bonding of nylon fabric part I: effect of a functional monomer

Release Characterization of Drugs in Hot-melt Pressure Sensitive Adhesive

Experimental study of strain rate effects on the strength of adhesively bonded joints after hygrothermal exposure

Influence of Silicone Additives on the Properties of Pressure-Sensitive Adhesives

Study on Adhesion Properties of a Hot-Melt Pressure-Sensitive Adhesive Based on Epoxidized Styrene–Isoprene-Styrene Triblock Copolymers (ESIS) for Transdermal Drug Delivery Systems

Synthesis, characterization, and pressure-sensitive properties of butyl acrylate and methyl acrylate copolymers

Hygrothermal degradation and recoverability of mechanical properties of epoxy adhesive joints for automotives

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive

Effects of Crosslinking and Silicone Coupling Agent on Properties of EVA Composite Hot Melt Adhesive

Study of Synthesis of Dual-Curing Thermoplastic Polyurethane Hot-Melt Adhesive and Optimization by Using Gray Relational Analysis to Apply in Fabric Industry to Solve Seamless Bonding Issues

Investigation of analysis and improvement of the assessment of bonding performance for thermoplastic composites

Poly(2-ethyl hexyl acrylate-co-methyl allyl polyethylene glycols ether–co-acrylic acid) pressure-sensitive adhesives: synthesis, characterization, investigations of adhesive and thermal properties

Revealing the Impact of Viscoelastic Characteristics on Performance Parameters of UV-Crosslinked Hotmelt Pressure-Sensitive Adhesives: Insights from Time–Temperature Superposition Analysis

Analysis of the influence of damp-heat aging on the shear failure of the adhesive joint of composite materials