Abstract:In this paper, the width and depth of rectangular surface-breaking defects were successfully gauged using an all-optical laser-ultrasonic system. The finite element method was used to simulate propagating paths of defect-induced reflected and transmitted Rayleigh waves. It is observed that most Rayleigh waves with wavelengths less than the depth of the defect are reflected by the defect. A small part of the Rayleigh waves with wavelengths greater than the depth of the defect directly transmits through the bottom edge of the defect without acting on the left edge of the defect. Based on the simulation results, a three-step detection method of width and depth gauging of rectangular surface-breaking defects is proposed. In the first step, the pulsed laser and detection laser are irradiated on one side of the defect. In the second step, the sample is moved to a certain distance to ensure that both lasers reach the other side of the defect. In the third step, two lasers are irradiated on both sides of the defect. The width and depth of the defect are calculated according to the arrival time of the incident, reflected, and transmitted Rayleigh waves, as well as the movement distance of the sample. Experimental results are consistent with the reference-results measured by using a digital microscope. The proposed three-step detection method is proved to be feasible in simultaneous measurement of the width and depth of rectangular surface-breaking defects. Furthermore, it may be potentially useful for measuring other types of defect structures.

Detection of Subsurface Defects of Fused Silica Optics by Confocal Scattering Microscopy

Detection of Defects in Optics Based on Scanning

Defects Evaluation System for Spherical Optical Surfaces Based on Microscopic Scattering Dark-Field Imaging Method

Numerical simulation research and applications on scattering imaging of surface defects on optical components

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Detection of surface defects and subsurface defects of polished optics with multisensor image fusion

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

Experimental Investigation of Subsurface Damage Depth of Lapped Optics by Fluorescent Method

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

3D Dark-Field Confocal Microscopy for Subsurface Defects Detection.

Depth localization of subsurface defects by optical dark-field confocal microscopy

Non-destructive testing of subsurface damage for early indication of laser-induced damage threshold in fused silica

Confocal laser scanning and 3D reconstruction methods for the subsurface damage of polished optics

Laser-induced Ultrasonic Measurements for the Detection and Reconstruction of Surface Defects

Non-destructive evaluation of UV pulse laser-induced damage performance of fused silica optics

Quantitative Evaluation of Subsurface Damage by Improved Total Internal Reflection Microscopy

Automatic evaluation system for bulk defects in optics

Research Progress on Subsurface Defects in Fused Silica

Correlation Between Photoluminescence Properties of Surface Defects and Laser-Induced Damage Threshold of Fused Silica

Automatic detection of quartz glass subsurface defects by laser scattering method based on an ellipsoidal mirror