Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. To investigate the effect of the size, shape and distribution of eutectic Si on the thermal conductivity, electrical conductivity and mechanical properties of near-eutectic Al-Si-Fe-Mg alloys, the morphology of eutectic Si was improved by modification and subsequent T6 heat treatment. The average size and aspect ratio of the eutectic Si decreased from 11.22 μm and 7.92 to 2.09 μm and 2.78 after modification by 0.04% Sr. After subsequent T6 heat treatment, the average size and aspect ratio of eutectic Si further decreased to 0.96 μm and 1.57. And the morphology of eutectic Si transformed from coarse lamellar to highly branched and refined fibrous, which were attributed to fusion and spheroidization of eutectic Si during the T6 heat treatment. The thermal and electrical conductivity of the alloy increased from 155.99 W/(m·K) and 35.64 pct IACS to 172.58 W/(m·K) and 37.05 pct IACS after modification and heat treatment, and the ultimate tensile strength and elongation increased from 162.05 Mpa and 0.78% to 256.16 Mpa and 4.09%, respectively. The shape and size of eutectic Si play an essential role in improving the properties of the alloy, not only by increasing the gaps between eutectic Si, promoting more electron transfer channels and reducing the scattering effect on the electron flow through the α-Al matrix, but also by reducing the cutting effect of the eutectic Si on the matrix and enhancing the ultimate tensile strength and elongation of the alloy.

Microstructural Evolution Behavior of Mg–5Si–1Al Alloy Modified with Sr–Sb During Isothermal Heat Treatment

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

Heterogeneous Nucleation of Mg2Si on Sr11Sb10 Nucleus in Mg–x(3.5, 5 Wt.%)si–1al Alloys

The Influence of Al–10Sr Or/ and Al–5Ti–1B on Microstructure and Mechanical Properties of Al–12Si–4Cu–2Ni–0.8 Mg Alloys

Behavior of Mg–6Al–xSi alloys during solution heat treatment at 420°C

Effects of Sr Modification on Microstructure of Al-Si Alloy

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Development of Spherical Eutectic Si Particles through M-SIMA Process and Its Effects on the Tensile Properties of Al-7Si-0.05Sr Alloy

Effects of Sb on Microstructure and Mechanical Properties of Mg-5.5al-1.2y Alloy

Polymorphic transformation and elemental diffusional controlled phase spheroidization of eutectic VNbTiSi medium entropy alloy during heat treatment

Effect of Modification with Different Contents of Sb and Sr on the Thermal Conductivity of Hypoeutectic Al-Si Alloy

Microstructure Evolution of Semi-Solid Mg-14Al-0.5Mn Alloys During Isothermal Heat Treatment

The Microstructure and Properties of Sr-Modified Al-3Si-0.45Mg-0.45Cu-0.2Sc-0.2Zr Cast Alloy

Microstructure evolution of semi-solid billet fabricated by semi-solid isothermal heat treatment of wrought AlSi7Mg aluminum alloy

Effect of modification and subsequent heat treatment on thermal and mechanical properties of near-eutectic Al-Si-Fe-Mg alloys

Modification of Primary Mg2si in Mg-4si Alloys with Antimony

Microstructural evolution and thermal stability of Al–Zn–Mg–Cu–Si–Zr alloy fabricated via spark plasma sintering

Microstructure control and performance evolution of hypereutectic Al–20Mg2Si alloy by novel Al–Ca–Sb master alloy

Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al−Si alloys

INFLUENCE OF ADDITIVE Sr OR Sb ON MODIFICATION OF Al-Si ALLOYS

Microstructure evolution of semi-solid Mg–10Gd–3Y–0.5Zr alloy during isothermal heat treatment