Abstract:Micro-alloying effects of Mn and/or Zr on the microstructure evolution of the ageing precipitates of Al-11.5Si–4Cu alloy (in wt.%) were investigated by TEM observation. The relationship of the microstructure evolution with the variation of mechanical properties is discussed. Mn micro-alloying in Al-11.5Si–4Cu alloy decreases the yield strength at room temperature, but significantly increases the yield strength at 300oC in the state after a long-time heat exposure at 300oC for 100h. Zr micro-alloying remarkably improves the yield strength at room temperature and 300oC, but severely degrades the yield strength at 300oC in the state after the same heat exposure. Zr micro-alloying significantly rises the density of the precipitates of θ′ phase formed during the ageing treatment and simultaneously decreases their size, and hence significantly increases the yield strength at room temperature. For Al-11.5Si–4Cu alloy, it is found that the nano precipitates of θ′ which form during the ageing treatment are almost completely transformed into the coarse equilibrium θ phase during the long-time heat exposure. However, Mn micro-alloying greatly suppresses the formation of θ phase or the phase transformation of θ′ → θ during the long-time heat exposure. Thus, the long-time heat exposure only leads to a small decrease of 6Mpa in the yield strength at 300oC of the alloy with Mn micro-alloying. Zr micro-alloying doesn't improve the thermal stability of θ′ phase during the long-time heat exposure, and conversely promotes the phase transformation of θ′→θ. Thus, after the heat exposure at 300oC for 100h, the yield strength at 300oC of the alloys with Zr micro-alloying is greatly decreased, even lower than that of the base alloy.

Microstructural evolution and thermal stability of Al–Zn–Mg–Cu–Si–Zr alloy fabricated via spark plasma sintering

Effect of mechanical milling on microstructure evolution and mechanical properties of Al–Zn–Mg–Cu–Si alloy fabricated via spark plasma sintering

The Study on Heat Treatment Microstructure and Properties of Extruded Al-Mg-Si-Mn-Cr-Zr Alloy

Effect of heat treatments on microstructure and mechanical properties of sand cast Al–2Li–2Cu–0.5Mg–0.2Sc–0.2Zr alloy

Microstructure and Mechanical Properties of an Al–Mg–Si–Zr Alloy Processed by L-PBF and Subsequent Heat Treatments

Microstructural Evolution and Mechanical Properties of Cast Al-2Li-2Cu-0.5Mg-0.2Zr Alloy During Heat Treatment

The Microstructure and Properties of Al–Mn–Cu–Zr Alloy after High-Energy Ball Milling and Hot-Press Sintering

Effect of cooling rates and heat treatment time on Si phase of AlSi10Mg alloy manufactured by selective laser melting: Microstructure evolution and strengthening mechanism

Micro-alloying effects of Mn and Zr on the evolution of ageing precipitates and high temperature strength of Al-11.5Si–4Cu alloy after a long-time heat exposure

Microstructure, tensile properties and heat-resistant properties of selective laser melted AlMgScZr alloy under long-term aging treatment

Microstructure and Properties of Mg-5Al-1.5Ca-0.4Zn Based Alloyby Semi-Solid Isothermal Heat-Treatment-die-pressure-casting Process

A Novel Two-Stage Heat Treatment with Medium-Temperature Aging Influence on Microstructure, Al3(Sc, Zr) Nanoprecipitation, and Application Properties, Enhancing Selective Laser Melting of Al–Mg–Sc–Zr Alloy

Exploring Microstructure, Wear Resistance, and Electrochemical Properties of AlSi10Mg Alloy Fabricated Using Spark Plasma Sintering

Mechanical Properties and Thermal Stability of W-ZrC/HfC-Re Alloys Fabricated by Spark Plasma Sintering

Microstructural Evolution and Mechanical Properties of Cast Al-3li-1.5cu-0.2zr Alloy During Heat Treatment

Effect of heat treatment on CuCrZr alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism

Effect of heat treatment on the microstructure, mechanical properties and fracture behaviors of ultra-high-strength SiC/Al–Zn–Mg–Cu composites

Microstructure and Mechanical Properties of Spark Plasma Sintered Mg-Zn-Ca-Pr Alloy

Selective Laser Melting of Al-Zn-Mg-Cu: Heat Treatment, Microstructure and Mechanical Properties

Effects of Heat Treatments on Microstructure and Mechanical Properties of Mg–4Y–4Sm–0.5Zr Alloy

Effect of Heat Treatment on Microstructure and Mechanic Properties of Gravity Casting Mg-5.8Sm-0.4Zn-0.3Zr Magnesium Alloy