Abstract:Micro-alloying effects of Mn and/or Zr on the microstructure evolution of the ageing precipitates of Al-11.5Si–4Cu alloy (in wt.%) were investigated by TEM observation. The relationship of the microstructure evolution with the variation of mechanical properties is discussed. Mn micro-alloying in Al-11.5Si–4Cu alloy decreases the yield strength at room temperature, but significantly increases the yield strength at 300oC in the state after a long-time heat exposure at 300oC for 100h. Zr micro-alloying remarkably improves the yield strength at room temperature and 300oC, but severely degrades the yield strength at 300oC in the state after the same heat exposure. Zr micro-alloying significantly rises the density of the precipitates of θ′ phase formed during the ageing treatment and simultaneously decreases their size, and hence significantly increases the yield strength at room temperature. For Al-11.5Si–4Cu alloy, it is found that the nano precipitates of θ′ which form during the ageing treatment are almost completely transformed into the coarse equilibrium θ phase during the long-time heat exposure. However, Mn micro-alloying greatly suppresses the formation of θ phase or the phase transformation of θ′ → θ during the long-time heat exposure. Thus, the long-time heat exposure only leads to a small decrease of 6Mpa in the yield strength at 300oC of the alloy with Mn micro-alloying. Zr micro-alloying doesn't improve the thermal stability of θ′ phase during the long-time heat exposure, and conversely promotes the phase transformation of θ′→θ. Thus, after the heat exposure at 300oC for 100h, the yield strength at 300oC of the alloys with Zr micro-alloying is greatly decreased, even lower than that of the base alloy.

Effect of heat treatment on microstructure and dimensional stability of ZL114A aluminum alloy

Effect of heat treatments on microstructure and mechanical properties of sand cast Al–2Li–2Cu–0.5Mg–0.2Sc–0.2Zr alloy

Effect of heat treatment on microstructure and mechanical properties of Mg-4Y-1.6Nd-1Sm-0.5Zr alloy

Effect of Aging Treatment Temperature on Microstructure and Properties of Al-9.3Si-0.41Mg-0.2Zr-0.01Sr-0.08Ti-0.2Ce Cast Aluminum Alloy

Effect of Aging Treatment on Microstructure and Mechanical Properties of As-Extruded AA6063 Aluminum Alloy

Micro-alloying effects of Mn and Zr on the evolution of ageing precipitates and high temperature strength of Al-11.5Si–4Cu alloy after a long-time heat exposure

Effect of Heat Treatment on Microstructure and Mechanical Properties of MA2-1 Alloy Sheet

Effect of multi-stage solution and aging process on microstructure and properties of Al–10.7Zn–2.8Mg–1.2Cu–0.2Zr aluminum alloy extrusion materials

Effects of under-aging treatment on microstructure and mechanical properties of squeeze-cast Al-Zn-Mg-Cu alloy

Effects of solution temperature on microstructure and mechanical properties of Al-Si-Mg aluminum alloy fabricated by wire-arc additive manufacturing

Effect of heat treatment on the microstructure and mechanical properties of Al‐9Si‐0.4Mg‐0.1Cu alloy

Effects of aging treatment on the precipitation behaviors and mechanical properties of Al-5.0Mg-3.0Zn-1.0Cu cast alloys

Effect of Heat Treatment on Microstructure,Tensile Strength and Intergra nular Corrosion of 2519 Aluminum Alloy

Effect of a Novel Thermomechanical Treatment on Microstructure and Mechanical Properties of 7034 Aluminum Alloy

Effects of Heat Treatment on the Microstructure and Properties of Graded-Density Powder Aluminum Alloys

Study on the inhomogeneity of Al–Zn–Cu–Mg aluminum alloy plates with different thickness

Experimental and Simulation Study for the Influence of Thermal Pre-Deformation on Subsequent Aging Precipitation Kinetics of Al-Zn-Mg-Cu Alloy

Effect of grain thickness and T 1 precipitate on the strength anisotropy of Al-4.0Cu-1.0Li-0.4Mg-0.4Ag-xZr alloys under different heat treatment

Effect of the Solid Solution and Aging Treatment on the Mechanical Properties and Microstructure of a Novel Al-Mg-Si Alloy

Regulating microstructure and mechanical properties of the as-cast Mg-4Zn-0.5Y-0.5Nd alloy by heat treatment

Microstructure and mechanical properties synergistically enhanced via heat treatment modification of the as-extruded Mg-1.5Al-0.5Zn-0.2Y-0.2Ca alloy