Abstract:The ever-increasing demand for higher I/O counts on chip requires the finer pitches to improve the performance, cost effectiveness and higher yield. The conventional under bump metallization (UBM) technology may not guarantee the required performance due to higher current density and diffusivity nowadays. In order to overcome these challenges, a UBM with higher strength and resistance to diffusion, better thermal and microstructural properties are required. Recently, nano reinforced Ni-P alloy has been identified as potential approach. Especially, the addition of Carbon nanotube (CNT) was expected to provide strengthening to the resulting UBM layers. CNTs have exceptional and attractive thermal, electrical, and mechanical properties, and are believed to be ideal material for fabricating composites. However, due to the large surface volume ratio, CNTs have strong tendency to agglomerate, which results in clusters. CNT clusters may lead to void formation and further cracking. Therefore, it is of great importance to figure out methods to disperse and incorporate CNTs into Ni-P UBM. In order to disperse carbon nano-tubes in electroless Ni-P coatings, two approaches were employed. Chemical modification, which includes acid oxidation treatment and surfactant treatment were conducted to disperse CNT clusters. Meanwhile, magnetic stirring and ultrasonic agitation were also employed to prepare the CNT/Ni-P composite coatings with CNTs homogeneously embedded. SEM and TEM were used to observe the dispersion after adopting the aforementioned treatment as well as the surface morphology of the deposited layers. It was verified that the dispersion can be significantly improved after proper treatment process, and surface of the CNT/Ni-P was quite smooth; CNTs were equably dispersed throughout the matrix. In addition, the interfacial bonding between CNTs and Ni-P coatings was good and firm. In these cases, an understanding of the effects of the acid oxidation, surfactant dispersant- magnetic stirring and ultrasonic agitation on CNT dispersion in both solution and deposited layer were ascertained.

Influence of the Surface Treatment on the Deposition of Platinum Nanoparticles on the Carbon Nanotubes

Preparation, Structure and Electrochemical Hydrogenation of Carbon Nanotubes Supported Platinum Catalysts

Deposition of the Platinum Crystals on the Carbon Nanotubes

Optimization of the technique for depositing platinum on carbon nanotubes

Oxygenated Group and Structural Defect Enriched Carbon Nanotubes for Immobilizing Gold Nanoparticles

Platinum Deposition on Carbon Nanotubes Via Chemical Modification

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Deposition of Platinum Nanoparticles on Carbon Nanotubes by Supercritical Fluid Method

Selective Heterogeneous Nucleation and Growth ofSize-Controlled Metal Nanoparticles on Carbon Nanotubes in Solution

Preparation of Copper Nanoparticles on Carbon Nanotubes by Electroless Plating Method

Electro-catalytic Oxidation of CO on Pt Catalyst Supported on Carbon Nanotubes Pretreated with Oxidative Acids

High dispersion and electrocatalytic properties of platinum nanoparticles on surface-oxidized single-walled carbon nanotubes

Enhanced Field Emission from Carbon Nanotubes by Electroplating of Silver Nanoparticles

Processes of Depositing Platinum on Carbon Nanotubes and Their Effecton Performance of Proton Exchange Membrane Fuel Cell

Achieving uniform Pt deposition site by tuning the surface microenvironment of bamboo-like carbon nanotubes

Effective method to disperse and incorporate Carbon nanotubes in electroless Ni-P deposits

Influence of Synthesis Process on Preparation and Properties of Ni/CNT Catalyst

Microwave Radiation-Assisted Synthesis of Pt-Cnts

Fabrication of Pt deposited on carbon nanotubes and performance of its polymer electrolyte membrane fuel cells

THE EFFECT OF SURFACE TREATMENTS ON HYDROGEN STORAGE OF CARBON NANOTUBES

Concentration-dependent Morphology Control of Pt-coated-Ag Nanowires and Effects of Bimetallic Interfaces on Catalytic Activity