Abstract:I-girders with corrugated webs (IGCWs) are a new type of structure that has been increasingly used in engineering. The normal stress distribution in flanges of IGCWs is quite complicated compared with that of conventional I-girders under in-plane loads. This study numerically and theoretically investigates the normal stress distribution rules and mechanisms in flanges of I-girders with trapezoidal corrugated webs (IGTCWs) under uniform bending in the elastic stage. First, finite element (FE) modelling was developed using ABAQUS software and verified by the available experimental results. Based on the verified FE models, a detailed analysis of the normal stress distribution in flanges of IGTCWs was performed. The results show that the normal stresses are nearly uniformly distributed over the flange in cross-sections with inclined web folds. Normal stresses in cross-sections with parallel web folds are approximately linearly distributed along the flange width, with stresses away from the corrugated web side being much larger than those near it. Its mechanism is explored using a secondary transverse moment theory, which is improved and completed by considering the proposed effective cross-section coefficient and equivalent width coefficient for the action of shear flow. The reliability of this theory was verified through comparison with the normal stress difference and distribution results of the supplementary FE models. Finally, the formulae for calculating the normal stresses in flanges of different cross-sections of IGTCWs under uniform bending are presented. These formulae suggest that secondary normal stresses generated by secondary transverse moments in cross-sections with parallel web folds account for 7% to 13% of the total normal stresses and cannot be ignored in the stress analysis.

STRENGTH OF I-SHAPED GIRDERS WITH SINUSOIDAL CORRUGATED WEBS UNDER PATCH LOADING

Finite element analysis on shear capacity of the corrugated web H-shaped steel beam

Elastic Buckling of Web Plates in I-girders under Patch and Wheel Loading

Shear resistance of slender webs in I-girders

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Structural spatial analysis method of prestressed concrete box girder with corrugated steel webs

Revisiting the Bearing Stresses in Webs of Crane Runway Girders under Wheel Loads

Stress Behavior in Embedded Connection Zone of Box Girder with Corrugated Steel Webs

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Strength and Design of Pin-Ended Circular Arches with Sinusoidal Corrugated Web under Combined In-Plane Loads

Study on the natural frequency of box girders with corrugated steel webs

In-Plane Failure Mechanism and Strength of Pin-Ended Steel I-Section Circular Arches with Sinusoidal Corrugated Web

A theoretical and experimental study of the shear strength of H-Shaped members with sinusoidal corrugated webs

Mixed-mode fatigue crack growth analysis of I-shaped steel girders with trapezoidal corrugated-webs

Numerical and theoretical analysis of normal stress distribution in flanges of I-girders with trapezoidal corrugated webs under uniform bending

Patch-loading Resistance of QN1803 and S32001 High-Strength Stainless Steel Plate Girders: Experimental Study and Numerical Simulation

THEORETICAL AND EXPERIMENTAL STUDY ON THE FLEXURAL MEMBER WITH SINUSOIDAL CORRUGATED WEB

Shear Response of Prestressed Thin-Webbed Continuous Girders

EFFECTIVE STIFFNESS METHOD FOR CALCULATING DEFLECTION OF CORRUGATED WEB GIRDER

Analysis of Influential Factors on Additional Shear Force Induced by Shear Deformation in Girder Bridges with Corrugated Steel Webs

CALCULATION OF LOAD-BEARING CAPACITY AND DEFORMATION IN SINGLY-STEPPED SINUSOIDAL CORRUGATED WEB COLUMN