Abstract:The conventional method (CM) for shear lag analysis of thin-walled box girders supposes that the neutral axis coincides with the centroidal axis of the whole cross section, and thus neglects the axial equilibrium condition. An analytical method considering axial equilibrium and shear deformation, which is referred to as PM, is proposed for overcoming the defect of the conventional method. The longitudinal displacement of the web is introduced to satisfy the axial equilibrium condition and locate the neutral axis automatically. The shear deformation is considered according to the Timoshenko beam theory. Three independent shear lag functions are adopted for describing different shear lag intensities of the top, bottom and cantilever slabs. The governing differential equations for the displacement variables are deduced by means of the virtual work theorem and solved with the relevant boundary conditions. The analytical solution is then derived for the distance from the neutral axis to the top fiber of the cross section. The accuracy of the proposed method is validated by comparisons with the available experimental data as well as the finite element analysis results. Moreover, the distances from the neutral axis to the top fiber, axial forces, and stress difference ratios are analyzed for typical thin-walled box girders to quantify the influence of the axial equilibrium condition. Finally, an extensive parametric study is conducted to examine the effects of various geometric parameters on the stress difference ratio under different load types. The results show that the proposed method can provide good predictions for both deflections and axial stresses, and neglecting axial equilibrium leads to considerable underestimations of axial stresses especially at the top flange-web junctions over the interior support of the continuous box girder.

EFFECTIVE STIFFNESS METHOD FOR CALCULATING DEFLECTION OF CORRUGATED WEB GIRDER

Finite element analysis on shear capacity of the corrugated web H-shaped steel beam

Shear resistance of slender webs in I-girders

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Theory Model of Corrugated Steel Web Girder Considering Web Shear Behavior

Structural spatial analysis method of prestressed concrete box girder with corrugated steel webs

AN INSIGHT INTO FORMULAS FOR PREDICTING THE LOCAL BEARING STRESS IN WEBS OF CRANE RUNWAY BEAMS

Revisiting the Bearing Stresses in Webs of Crane Runway Girders under Wheel Loads

Analytical Theory of Composite Beams with CSWs Using the State Space Method

Computation of Local Bearing Stress in Web of Beams Supporting Overhead Cranes

Static Characteristics of Improved Composite Box Girder with Corrugated Steel Webs

THEORETICAL AND EXPERIMENTAL STUDY ON THE FLEXURAL MEMBER WITH SINUSOIDAL CORRUGATED WEB

CALCULATION OF LOAD-BEARING CAPACITY AND DEFORMATION IN SINGLY-STEPPED SINUSOIDAL CORRUGATED WEB COLUMN

Shear Resistance of Stiffened Steel Corrugated Shear Walls

Flexural Decoupling Analysis Method of Composite Box Girder with Corrugated Steel Webs

Study on the natural frequency of box girders with corrugated steel webs

Shear Response of Prestressed Thin-Webbed Continuous Girders

The Effect of Shear Span on the Behavior of Triangularly Corrugated Web Steel Girders

Improved method for shear lag analysis of thin-walled box girders considering axial equilibrium and shear deformation

Lateral Deformation Calculation of Sinusoidal Corrugated Web Portal Frames

Computation of Deflections for PC Box Girder Bridges with Corrugated Steel Webs considering the Effects of Shear Lag and Shear Deformation