Abstract:Thin-walled tubes are widely used as energy absorption components in vehicle crashworthiness design where axial crushing is one of the most typical loading conditions. Lightweight materials such as high-strength steel, aluminum and magnesium have been applied for thin-walled tubes for weight reduction. Meanwhile, most of these lightweight materials are more brittle and easily fractured than traditional steel. Distribution and history of stress triaxiality and equivalent strain in the thin-walled tubes under axial crushing have been analyzed in this article with finite element simulation, as these two parameters of stress and strain states are commonly used for constructing fracture locus of materials. It is observed that both stress triaxiality and equivalent strain are transferring along the tube length like waves. Analysis results show that fracture is more likely to take place on the edge than the other positions of square thin-walled tubes. For identical axial crushing stroke, there is little difference of stress and strain states inside the square thin-walled tubes with initial impact velocity varying from 6m/s to 24m/s. Influence of geometrical parameters on the stress and strain states have also been analyzed, including the shape of cross-section corner, the wall thickness and the shape of cross-section, respectively. Analysis results in this article may offer references for design of thin-walled tubes and the necessary experimental characterization of mechanical properties for lightweight materials.

The Effect of Thermal Environment on Axial Crushing Load of Sandwich Tubes

Effects of Temperature on Axial Crushing Behavior of Circular Multi-Walled Tubes

Influence of temperature change on column buckling of multiwalled carbon nanotubes

Axial Impact Behaviors of Stub Concrete-Filled Square Steel Tubes

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Analytical Method for the Axial Crushing Force of Fiber-Reinforced Tapered Square Metal Tubes

On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing

Behaviour of Tube under Axial Crush Load with Considering Effect of Heat Exchanged

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

Axial Impact Behavior and Energy Absorption Efficiency of Composite Wrapped Metal Tubes

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Axial Crushing of Triangular Tubes

Elevated Temperature Axial Crushing Performance of Multi-Walled Tube-Reinforced Aluminum Foam

On axial splitting and curling behaviour of circular sandwich metal tubes with metal foam core

Eccentricity Effects on the Crushing History and Energy Absorption of Metal Tubes Collapsed in Concertina Mode

Axial crushing response of carbon/glass hybrid composite tubes: An experimental and multi-scale computational study

Size Effects in the Axial Tearing of Circular Tubes During Quasi-Static and Impact Loadings

Axial Crushing Behaviors of Multi-Cell Tubes with Triangular Lattices

Quasi-Static Axial Compression of Triangular Steel Tubes

EFFECT OF ECCENTRICITY ON THEAXIAL CRUSHING BEHAVIOR OFROUND METAL TUBES