Abstract:Thin-walled tubes are widely used as energy absorption components in vehicle crashworthiness design where axial crushing is one of the most typical loading conditions. Lightweight materials such as high-strength steel, aluminum and magnesium have been applied for thin-walled tubes for weight reduction. Meanwhile, most of these lightweight materials are more brittle and easily fractured than traditional steel. Distribution and history of stress triaxiality and equivalent strain in the thin-walled tubes under axial crushing have been analyzed in this article with finite element simulation, as these two parameters of stress and strain states are commonly used for constructing fracture locus of materials. It is observed that both stress triaxiality and equivalent strain are transferring along the tube length like waves. Analysis results show that fracture is more likely to take place on the edge than the other positions of square thin-walled tubes. For identical axial crushing stroke, there is little difference of stress and strain states inside the square thin-walled tubes with initial impact velocity varying from 6m/s to 24m/s. Influence of geometrical parameters on the stress and strain states have also been analyzed, including the shape of cross-section corner, the wall thickness and the shape of cross-section, respectively. Analysis results in this article may offer references for design of thin-walled tubes and the necessary experimental characterization of mechanical properties for lightweight materials.

Behaviour of Tube under Axial Crush Load with Considering Effect of Heat Exchanged

Axial Impact Behaviors of Stub Concrete-Filled Square Steel Tubes

The Effect of Thermal Environment on Axial Crushing Load of Sandwich Tubes

Theoretical and numerical study on axial crush of new extruded multi-cell tube

On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing

Effects of Temperature on Axial Crushing Behavior of Circular Multi-Walled Tubes

Theoretical Prediction and Numerical Analysis of Axially Crushed Square Tube with Induced Folding Patterns

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

Quasi-Static Axial Compression of Triangular Steel Tubes

Collapse Of Tubes Under Combined Bending And Axial Compression Loads

Axial Crushing of Triangular Tubes

Computer Simulation for Tube Crushing

Size Effects in the Axial Tearing of Circular Tubes During Quasi-Static and Impact Loadings

Experimental and numerical study of circular, stainless thin tube energy absorber under axial impact by a control rod

Modeling Hydraulically Expanded Tube-To-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Strength and Fatigue Analysis of Tube-Sheet Subjected to Thermal Shock

Energy Absorption Characteristics of Round Mild Steel and Stainless Steel Tube under Axial Impact

An investigation on the energy absorption characteristics of a multi-cell hexagonal tube under axial crushing loads

Eccentricity Effects on the Crushing History and Energy Absorption of Metal Tubes Collapsed in Concertina Mode

Experimental Study of Thin-Walled TiNi Tubes under Radial Quasi-Static Compression