Abstract:The porous TiCO ceramic was synthesized through a one-step sintering method, utilizing phenolic resin, TiO2 powder, and KCl foaming agent as raw materials. Ni(NO3)2·6H2O was incorporated as a catalyst to facilitate the carbothermal reaction between the pyrolytic carbon and TiO2 powder. The influence of Ni(NO3)2·6H2O catalyst content (0, 5, 10 wt.% of the TiO2 powder) on the microstructure, compressive strength, and thermal conductivity of the resultant porous TiCO ceramic was examined. X-ray diffraction and X-ray photoelectron spectroscopy results confirmed the formation of TiC and TiO in all samples, with an increase in the peak of TiC and a decrease in that of TiO as the Ni(NO3)2·6H2O content increased from 0% to 10%. Scanning electron microscopy results demonstrated a morphological change in the pore wall, transforming from a honeycomb-like porous structure composed of well-dispersed carbon and TiC-TiO particles to rod-shaped TiC whiskers, interconnected with each other as the catalyst content increased from 0% to 10%. Mercury intrusion porosimetry results proved a dual modal pore-size distribution of the samples, comprising nano-scale pores and micro-scale pores. The micro-scale pore size of the samples minorly changed, while the nano-scale pore size escalated from 52 nm to 138 nm as the catalyst content increased from 0 to 10%. The morphology of the pore wall and nano-scale pore size primarily influenced the compressive strength and thermal conductivity of the samples by affecting the load-bearing capability and solid heat-transfer conduction path, respectively.

Porous biomorph-genetic TiN/C ceramics by carbothermal reduction-nitridation using beech wood

Microstructure, Mechanical Property and Thermal Conductivity of Porous TiCO Ceramic Fabricated by In Situ Carbothermal Reduction of Phenolic Resin and Titania

Columbite-rich Multiphase TiO2 Nanoceramic with Superior Mechanical and Dielectric Properties

Porous Titanium Carbide Ceramics Fabricated by Coat-Mix Process

Preparations of Titanium Nitride, Titanium Carbonitride and Titanium Carbide Via a Two-Step Carbothermic Reduction Method

Preparation of High-Hardness Titanium Oxycarbonitride Ceramic and Its Composite with TiB2

The microstructure and photocatalytic properties of nitrogen-doped nano titanium dioxide loaded on porous ceramics

Preparation of high-entropy (Ti,Nb,Ta,Mo,W)(C,N) ceramics via carbothermal reduction nitridation using different carbon source

INFLUENCE OF Al2O3 ON PREPARING POROUS SILICON NITRIDE BASED CERAMIC FROM RICE HUSK

Ordered Mesoporous Nanocrystalline Titanium‐Carbide/Carbon Composites from in Situ Carbothermal Reduction

Effect of Ti Doping on the Microstructure and Properties of SiCp/Al Composites by Pressureless Infiltration

Optimized Vacuum/pressure Sol Impregnation Processing of Wood for the Synthesis of Silica/biocarbon Composite

Synthesis and Mechanical Properties of Highly Porous Ultrafine-Grain Si3N4 Ceramics Via Carbothermal Reduction-Nitridation Combined with Liquid Phase Sintering

Preparation of biomorphic porous SiC and SiO2 ceramics by sol infiltration into biotemplate followed by controlled sintering

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Simultaneous improvement in porosity and strength of porous β-Si3N4 ceramics by formation of ultrafine fibrous grains

Light-weight, wood-derived, biomorphic SiC ceramics by carbothermal reduction

Effects of pore microstructures on thermal and mechanical properties of porous TiC fabricated by hot press sintering

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Biomorphic Cellular Silicon Carbide Nanocrystal-Based Ceramics Derived from Wood for Use as Thermally Stable and Lightweight Structural Materials

Preparation and Characterization of N-doped TiO2/C Composite