Abstract:Thermal insulation is crucially important to the safety and reusability of aerospace vehicles. Fabrication of thermal insulation materials with light weight, high mechanical strength and low thermal conductivity remains challenging. In this study, porous polymer derived silicon oxycarbide (SiOC) ceramics with hierarchical structures mimicking cuttlebones were prepared through stereolithography additive manufacturing followed by pyrolysis. The compressive strength of SiOC ceramics with ridges ("R" structures) alongside the sinusoidal walls ("S" structures) (RS-SiOC, 13.37 ± 0.86 MPa for 7-RS-SiOC) mimicking those of cuttlebone was much higher than that of SiOC ceramics with just sinusoidal walls (S–SiOC, 8.43 ± 0.81 MPa), while the density of RS-SiOC with 7 ridges (7-RS-SiOC) and S–SiOC were 0.40 g/cm 3 and 0.39 g/cm 3 , respectively. Our results revealed that the tailored "S" and "R" structures of biomimetic 7-RS-SiOC ceramics, together with the amorphous network of SiOC assembled in the layer-by-layer manner, rendered the high mechanical strength. In addition, the 7-RS-SiOC sample exhibited a low thermal conductivity of 0.12 W/(m·K) at room temperature. The back temperature of the 7-RS-SiOC sample was 179.5 °C when exposed to 800 °C for 1200 s, showing excellent thermal insulation capability. The state-of-the-art biomimetic design of lightweight SiOC ceramics likely offers a solution to high-performance thermal insulation for aerospace vehicles.

Biomorphic Cellular Silicon Carbide Nanocrystal-Based Ceramics Derived from Wood for Use as Thermally Stable and Lightweight Structural Materials

Anisotropic, biomorphic cellular Si3N4 ceramics with directional well-aligned nanowhisker arrays based on wood-mimetic architectures

Light-weight, wood-derived, biomorphic SiC ceramics by carbothermal reduction

Wood‐Derived, Vertically Aligned, and Densely Interconnected 3D SiC Frameworks for Anisotropically Highly Thermoconductive Polymer Composites

Biomorphic Silicon/silicon Carbide Ceramics from Birch Powder

Preparation of Biomorphic SiC Ceramic by Carbothermal Reduction of Oak Wood Charcoal

Bioinspired, anisotropically highly thermoconductive silicon carbide/epoxy composite based on a nacre-mimetic architecture

Additive manufacturing of biomimetic lightweight silicon oxycarbide ceramics with high mechanical strength and low thermal conductivity

Advanced hierarchical biomorphous silicon carbide monoliths

Mechanical Properties and Microstructure of Si/Sic Materials Derived from Native Wood

Preparation of Biomorphic SiC/C Ceramics from Pine Wood Via Supercritical Ethanol Infiltration

Preparation of Porous Sic Ceramic with A Woodlike Microstructure by Sol-Gel and Carbothermal Reduction Processing

Preparation and Properties of Porous Microcellular SiC Ceramics by Reactive Infiltration of Si Vapor into Carbonized Basswood

Effect of starting Si contents on the properties and structure of biomorphic SiC ceramics

Effect of Steam Activation on Development of Light Weight Biomorphic Porous SiC from Pine Wood Precursor

Fabrication of biomorphic ZrC/C ceramics by sol–gel and carbothermal reduction processing

Fabrication of wood-like porous silicon carbide ceramics without templates

Microstructure and Mechanical Properties of Porous SiC Ceramics by Carbothermal Reduction and Subsequent Recrystallization Sintering

Preparation of Macroporous SiC from Si and Wood Powder Using Infiltration-Reaction Process

Microstructure analysis of morph-genetic SiC/C ceramics from wood

Complex SiC-based structures with high specific strength fabricated by vat photopolymerization and one-step pyrolysis