Abstract:The realization of the necessary energy-efficient technological solutions for the production of highly porous SiC-ceramic materials requires appropriate research. The results of developing energy-efficient one-step methods for the synthesis of porous SiC-based ceramics and studying the characteristics of the obtained ceramics are presented. The effect of the morphology of initial powders on the synthesized product is considered. Ultrafine silicon carbide powders of two types, identical in characteristic particle size, but quite different in the surface morphology, were used as fillers in the synthesis of experimental samples of porous ceramics. The first one was obtained by the traditional furnace method (SiC f ), the second one was synthesized by the technology of self-propagating high-temperature synthesis (SiC shs ). It is shown that the particle morphology of initial powder components determines the structural parameters and characteristics of synthesized porous ceramics. The pore space parameters (average pore size, specific surface area, equivalent hydraulic diameter, permeability, etc.) can vary significantly. Porous ceramic materials synthesized on the basis of SiC f have an open porosity of 47%, high liquid permeability (up to 2 mDarcy), overwhelming dominance of α-SiC phase, and a narrow pore distribution with an average pore size of about 1 μm. High open porosity (more than 58 %), highly developed nanostructured pore space surface with an area of more than 12 m 2 /g, and wider pore size distribution (average pore size — 140 nm) are observed in porous ceramic materials based on SiC shs . The obtained results can be used to improve energy-efficient synthesis technologies and methods for predicting the properties of highly porous SiC-based ceramic materials. This will make it possible to create highly porous SiC ceramics within a priory predicted limits of effective applicability for the processes of ultrafiltration or catalysis.

Preparation of biomorphic porous SiC and SiO2 ceramics by sol infiltration into biotemplate followed by controlled sintering

Preparation of Porous Sic Ceramic with A Woodlike Microstructure by Sol-Gel and Carbothermal Reduction Processing

Preparation of Biomorphic SiC/C Ceramics from Pine Wood Via Supercritical Ethanol Infiltration

Preparation and characterization of porous, biomorphic SiC ceramic with hybrid pore structure

Preparation of Biomorphic SiC Ceramic by Carbothermal Reduction of Oak Wood Charcoal

Preparation and Properties of Porous Microcellular SiC Ceramics by Reactive Infiltration of Si Vapor into Carbonized Basswood

Biomorphic SiC Ceramics Prepared by Organic Template Method

Effect of Steam Activation on Development of Light Weight Biomorphic Porous SiC from Pine Wood Precursor

Preparation of Macroporous SiC from Si and Wood Powder Using Infiltration-Reaction Process

Biomimetic Synthesis of Porous Si_3N_4 Ceramics

Microstructure analysis of morph-genetic SiC/C ceramics from wood

PREPARATION OF POROUS SiC CERAMIC BY GASEOUS REACTIVE INFILTRATION METHOD

PREPARATION OF MACROPOROUS SiC FROM WOODCERAMICS AND SILICON POWDER BY IN SITU REACTION-SINTERING PROCESS

Preparation of Biomorphic Sic-Ceramics by the Reactive Infiltration on of Si into Carbon Template Derived from Basswood

Optimized Vacuum/pressure Sol Impregnation Processing of Wood for the Synthesis of Silica/biocarbon Composite

Effect of starting Si contents on the properties and structure of biomorphic SiC ceramics

Study of the effect of the morphology of initial powders on the structural and dimensional characteristics of SiC-based porous ceramic materials

Biomorphic Silicon Nitride Ceramics with Fibrous Morphology Prepared by Sol Infiltration and Reduction–Nitridation

Preparation of Porous Si2N2O/SiC Ceramics by Microwave Sintering

Preparation of Porous SiC Ceramic Using Bamboo Charcoal and Silica Sol As Pore-Forming Agents

A Novel Method for the Preparation of Porous SiC