Abstract:Carbon nanomaterials exhibit outstanding electrical and mechanical properties, but these superior properties are often compromised as nanomaterials are assembled into bulk structures. This issue of scaling limits the use of carbon nanostructures and can be attributed to poor physical contacts between nanostructures. To address this challenge, we propose a novel technique to build a 3D interconnected carbon matrix by forming covalent bonds between carbon nanostructures. High temperature Joule heating was applied to bring the carbon nanofiber (CNF) film to temperatures greater than 2500 K at a heating rate of 200 K/min to fuse together adjacent carbon nanofibers with graphitic carbon bonds, forming a 3D continuous carbon network. The bulk electrical conductivity of the carbon matrix increased four orders of magnitude to 380 S/cm with a sheet resistance of 1.75 Ω/sq. The high temperature Joule heating not only enables fast graphitization of carbon materials at high temperature, but also provides a new strategy to build covalently bonded graphitic carbon networks from amorphous carbon source. Because of the high electrical conductivity, good mechanical structures, and anticorrosion properties, the 3D interconnected carbon membrane shows promising applications in energy storage and electrocatalysis fields.

Amorphous Carbon Nanotubes Produced by a Temperature Controlled DC Arc Discharge

Preparation of Large Amounts of Carbon Nanotubes in Hydrogen Atmosphere by Arc-Discharge

Morphology of Carbon Nanotubes Prepared by Carbon Arc

Carbon Nanotubes Grown on the Surface of Cathode Deposit by Arc Discharge

Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Hydrogen-Free Amorphous-Carbon Preparation and Properties

Influence of NH3 Atmosphere on the Growth and Structures of Carbon Nanotubes Synthesized by the Arc-Discharge Method

Crystallization Behavior of the Amorphous Carbon Nanotubes Prepared by the CVD Method

An Efficient Method to Produce Single-Walled Carbon Nanotubes by Round-Trip Arc Discharge

Mass-production of single-wall carbon nanotubes by arc discharge method

Temperature Selective Growth Of Carbon Nanotubes By Chemical Vapor Deposition

High Temperature Treatment and Characterization of Carbon Nanotubes

Amorphization and Directional Crystallization of Metals Confined in Carbon Nanotubes Investigated by in Situ Transmission Electron Microscopy

Structure Of Carbon Onions And Nanotubes Formed By Arc In Liquids

Mass-production of Single-Wall Carbon Nanotubes by Arc Discharge Method11this Work Was Supported by the National Natural Science Foundation of China, No. 29671030.

Catalyst-Free in Situ Carbon Nanotube Growth in Confined Space Via High Temperature Gradient

Annealing amorphous carbon nanotubes for their application in hydrogen storage

Carbon Welding by Ultrafast Joule Heating.

Large Scale Synthesis of Single-Wall Carbon Nanotubes by Arc-Discharge Method

Large‐Scale Synthesis, Annealing, Purification, and Magnetic Properties of Crystalline Helical Carbon Nanotubes with Symmetrical Structures